ALC88x 10.4.8 Kext, Drivers for ALC88x Audio on 8.8.1 kernel Options

[Joeyhzl]

thanks,kossi!My 2ch out and mic in works fine and the sound is much louder than it used to be!

[jjduro]

For those with ALC660/861


Hi you guys,
we're trying to get to some results on ALC660/861 on the thread ALC660.
lots of people with ALC660/861 + Asus F3Jc are experiencing a lot of dificulty with this particular soundcard.
It is similar to the hardware used on other systems that work with 2 channels, but, when used with Asus F3Jc it remais completely silent, and without output controls.

Why don't you go there and share your experience with this soundchip? It could help.

http://forum.insanelymac.com/index.php?sho...9&hl=alc861

Thanks

[Bluejacky]

It works well on my P35-DS3P. I didn't change any thing, after reboot it works with 2 ch out and in.

Thanks a lot.

Now graphic card DVI out is the biggest issue for me.

[ddrdark]

It works well on my P35-DS3P. I didn't change any thing, after reboot it works with 2 ch out and in.

Thanks a lot.

Now graphic card DVI out is the biggest issue for me.

Hi!, what it works?? the beta installer by skkipy? or the AppleAzalia.kext? thanks a lot! (I want a input! )

[skippyretard]

If ALC889a is using the ID 10ec0885, then you should only need ALCinject. That is the same ID as the Mac Pro, so no modified AppleHDA.kext should be needed.

[ddrdark]

Working in/out now!!! thanks kossi!!!! thanks a lot!!!

kossi have you tested the digital output with iTunes and system in general? or it just only works on VLC? thanks a lot again

PD: PLEASE STICK THIS POST!!

[dinohound]

Sorry I've been gone so long! I added a beta kext for ALC889 at the beginning of this thread, please post your results...

Where is it? ALC889 kext? I can't find it.

[ddrdark]

try this

[dinohound]

ok. It is working now. co-axle and optical digital out both working correctly.
You guys are so great! Thanks a lot.

[ddrdark]

ok. It is working now. co-axle and optical digital out both working correctly.
You guys are so great! Thanks a lot.

Please can u tell me if digital output is working in system in general? itunes, quicktime, garageband, etc?

thanks a lot!

[dinohound]

Digital output works in all application, including itune, quicktime, realplayer.......However, currently I don't have a DTS or Dolby Digital source to test if it works with full digital source.I will try to play a DVD or something with digital sound track to see whether it works.

Update: Ok, just player a DVD. The dvdplayer works with dolby digital sound track. The correct dolby digital was sent out from the optical/coaxle digital output, both my headphone and receiver can get the signal correctly.

[emzo]

Uphuck 10.4.9 1.3u
krenel version 8.9.1
GB P35-S3L ICH9
ALC 888
I cannon get sound working.
Tried ALC888Audio.pkg but no luck.

Dev id's are:
8086 293e - controller
10ec 0888 - audio

[emzo]

I managed to get audio working, by adding my dev ID to the kexts.
Mic in works
Line In works
Audio output:
In output i have 4 Line out devices.I cannot get sound played via all 7.1 speakers, i can only hear from each 2 speakers.
 audio.jpg ( 71.27K ) Number of downloads: 297

[fabricio_]

hi ,

im a new guy in a mac os x86 world

i get your pgk and install here and its goes strange ! the mac now recognize the driver , but the sound is only playable in headphone !! :x

i have the rtl883 card in my notebook and downloaded/installed the : AzaliaAudio.pkg

when i try to install the LC883Audio.pkg , nothing works ...

well , better in the headphone than nothing !

a nb question , how do i uninstall thoses pkgs ?

thank you =D

[h4z4rd]

Hey Skippy...

Another one here with a MSI 945GM3-F mobo. Any progress so far? It sucks only having two channel out. :/

[Pisang]

Many thanks Skippy!
Now my Acer Aspire 3680 got working front panel audio jack for headphone audio out and microphone jack. I'm using JaS 10.4.8 with ALC883 default installation. Now I can skype happily

p/s: My internal speaker not working now.. anybody know how to enable both headphone audio out and internal spekaer audio out at the same time please?

[stefinou]

hello, i'm also a new guy in mac os x86 world

i've made a mistake (i guess)
i installed ALC883 package (in the first post of this topic), everything worked fine, but i've installed the default way (3 ports), but my card have 6 port, so i wanted to reinstall the package, but in custom installation (selecting 6 ports checkbox) and now nothing works (surely because package for 3 ports aren't uninstalled)

does anyone know how to fix that please ?

thank you for your answers and sorry for my (poor) english

[3phemeral]

Someone asked me to upload Kossi's modified kext to get ALC889A working, so i'll post the mirror here as well. Click here [megaupload link].

[phanguy]

on my board(in my signature) i have alc883. i can't install the 883 package in any way. i can't get in or out. and both are definitely important to me. i can install the azalia, but i still get no input. i read about someone adding a line to the alcinject.kext. i looked at it and was wondering if it'd be useful at all to add <string>pci10ec,???</string> i have question marks cause i don't know what to put there. i'm not sure of how you got those numbers. i appreciate the help.

[sammosinga]

Hi!Guys..just wanna share with u,its work with my Gigabyte onbord sound..the model is same with DavidNYC(http://forum.insanelymac.com/index.php?showtopic=36520)....thanks,i just click the 1883pakage,restart and got sound alrady...really thanks u very much...

now look for NIC driver...