ALC88x 10.4.8 Kext, Drivers for ALC88x Audio on 8.8.1 kernel Options

[directedition]

The ALC883 driver doesn't seem to work on the ECS NFORCE 570 SLI-A motherboard. With 1.0.4.8+8.8.1 I run the installer and nothing happens upon boot. Unless, is there anything else I'm supposed to do after running the installer?

EDIT: Spoke too soon, another reboot and suddenly it works. Headphones only like many others, but a step forward.

[Ezhoon]

It is working, at last for me, 10.4.9 with kernel 8.9.1 - but, what so ever, I cannot get more that stereo !!!! If somebody can help-me to get that 5.1 I put the linux dump for my card (my mb is a asus P5L 1394, alc 883, 945P chipset). Hope to see a sunshine in here, since I was unnable to find master Skippyretard or Taruga on the chat room !

I am about to go for the 10.4.9 update on Gigabyte DS3 system but, I definitely do not want to lose my 5.1 setup.
tokra, did you get the 5.1 setup back? or
Can anyone confirm if 5.1 setup works or not under 10.4.9?

Thanks!!

[tokra128]

Nope. no 5.1 so far .. newer was ... only stereo and I am disperated

[Ezhoon]

Nope. no 5.1 so far .. newer was ... only stereo and I am disperated

Uh-oh..there goes my 10.4.9 for ds3

So is this common to all 10.4.9 updates?
I mean, noone successfully activated 5.1 setup under 10.4.9?

[MrDabada]

I have an intel high def. audio in my laptop. I installed the AzaliaAudio and finally I got sound. It was the only thing that really worked. However, although I have sound on my integrated speakers, I do not hear anything when I plug the headphones. Then there's no sound neither in the integrated nor the headphones. I didn't modify anything of the Azalia kext, maybe I should, but have no idea what to do.

Is there any solution to this? Thankyou

[Superhero360]

skippyretard Thank you so much for the help! I am running my Packard Bell iPower 9099 with sound!
Config see my sig

[erdo488]

ALC883 worked perfectly on my acer aspire 5634wlmi. I installed 3 ports without digital first but sound wasnt good then i installed 3 ports with digital somehow it worked.

i use headphones output and it senses when i plug in a headphone.

i use 10.4.8, 10.4.9 lowers harddisk speed i dont know why.

[cfactor07]

I have a Toshiba Satellite A205-S4587 with an ALC268 driver
i have no sound. Can someone help me on this problem

THis is the vendor number for it from Windows Vista Premium
HDAUDIO\FUNC_01&VEN_10EC&DEV_0268&SUBSYS_1179FF10&REV_1000
HDAUDIO\FUNC_01&VEN_10EC&DEV_0268&SUBSYS_1179FF10

[osxonmylaptop]

Hi,
Sound is working great with the ALC883Audio.pkg, using 6 ports option.
First I tryed with 3, then 3 digital, the 6 digital then 6.
So the installer works great with updating an existing installation, good work!
See my specs in signature.

[Ramz]

From where I can get particular number of my ACL880 ? And where should I paste it in Info.plist ?

Please help.

[tchow]

From : jsl

My audio problems are solved now.
1. Remove -x (safe boot) from my com.apple.Boot.plist
2. Using AppleHDA.kext (1.1.0a17) and remove AppleAzaliaAudio.kext
3. Set correct parameters: 0x10ec0880 0x27d88086 in AppleHDA.kext
4. verify it by kextload -t
5. After reboot I can use Mic In and Stereo Out from my ALC880 in laptop Asus A6JC

Another incomplete solution:
1. Remove -x (safe boot) from my com.apple.Boot.plist
2. Using AppleAzaliaAudio.kext(1.0.0d0) and remove AppleHDA.kext
3. Set correct parameters: 0x10ec0880 0x27d88086 in AppleAzaliaAudio.kext
4. verify it by kextload -t
5. After reboot I can get Stereo Out without Mic In from my ALC880 in laptop Asus A6JC

My solution is different from others and I think it's due to my Hac OS is 10.4.6/8.4.1 instead of 10.4.8/8.8.1

========================================================================
can you step by step teach me how to modify. I am newbin in MAC OSX Thanks

tchow

[Infamous]

Still no ALC888 on AsRock Conroe945G-DVI

[DaNStille]

People you save my life!! I´ve been without sound since the installation!!

AzaliaAudio stereo working without audio device recognize, no input, no volumem control (but vol. on menu does appear)
on Cmedia 9880 onboard on MSI915p Neo2 Platinum!!

Sorry about my english and minimal knowledge on programming, i´m only a graphic designer, been trying to put sound to work but terminal kills me, read in this forum that just drop the kext in extensions folder doesn´t work is that right?

if anyone have time, could you explain me how should i do to make osX recognize the card? is that the problem with volume control an mic in?

Thanks for the work done here!!!

[fpdesigner]

Hi

I have finished to install on my Hp pavilion the JAS Osx 10.4.9 all work , only one problem the sharing file to eMac OSX 10.4.9 PPC , and the AUDIO om the ALC 882 realtek card in board , i dont have linux i need a patch that work , someone can help me ?

I dont want to editing nothing because i 'm not an expert i fomething now a sure system FOR MY alc 882 , please send me message.

the taruga system maybe work but


My pc have all that working , today the GEFORCE 6100SE 64 MB going at the maxium resolution , thanx natit nv40.pkg
The ethernet work because i have put inside a realtek 8139
The firewire is the system profiler .
the DVD WORK
TODAY i try toast and cs3 .

BUT whitout ITUNE i'm not very happy .

IF someone know a easy solution that make my ALCD 882 work , please help me .

i don 't have linux i need only konw if one the TARUGA hack work on 10.4.9

thanx

[fuzzyland]

Hi,

I've installed ALC883Audio.pkg on Asus P5L-VM 1394 and it works! Thanks!

Martin

[Syntax-Influx]

THANK YOU VERY MUCH, it worked right away, now I can install my videocard, WiFi card and SoundCard (internall) with installers only. No .kext editing anymore .

-SI-

[MCL2k6]

Uh-oh..there goes my 10.4.9 for ds3

So is this common to all 10.4.9 updates?
I mean, noone successfully activated 5.1 setup under 10.4.9?

Hi Ezhoon, I've seen that you have stereo sound with your 10.4.9 and 8.9.1 kernel on P5LD2. Which driver are you using?
The Azalia or AppleHDA?

[Makoton]

I can't select 5.1 surround. TTWTT it's in grey

but microphone works

I had follow this method...
what I wrong??

my mobo is 965P-DS3 rev 3.3 and using alc888 and jas 10.4.9

(and now i'm in 3.1 channel speaker - front and center, rear isn't work)

any suggestion??

--------------------------------

EDITED:: or I should patch this kext before update into 10.4.9 ??

anyone know??

[tokra128]

Any ideea if apple dvd can be patched to use the agregate device as default out-put ? It will be great, since in that way we all will be able to have 5.1 sound (for those that allready have the agregate device working)

[cotom]

The ALC888 driver doesn't seem to work on the AsRock Conroe945G-DVI motherboard
Please help.