Chris B! Posted July 28, 2012 Share Posted July 28, 2012 Hey guys, I recently picked up a DWA-556 Dual Band because I heard it had great compatibility. It detects just fine as native AirPort on my Mountain Lion installation but it doesn't seem to pick up any networks. I assume that because it's detected, I don't need to modify any kexts. So I'm using vanilla Mountain Lion IONetworkingFamily.kext and IO80211Family.kext (does that sound right?). Here's the system profiler dump: Software Versions: CoreWLAN: 3.0 (300.9) CoreWLANKit: 2.0 (200.10) Menu Extra: 8.0 (800.7) configd plug-in: 8.0 (800.15) System Information: 8.0 (800.1) IO80211 Family: 5.0 (500.15) WiFi Diagnostics: 1.1 (110.26) AirPort Utility: 6.1 (610.31) Interfaces: en0: Card Type: AirPort Extreme (0x168C, 0x3A7E) Firmware Version: Atheros 9380: 4.0.70.23-P2P MAC Address: ... Locale: Unknown Country Code: Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Wake On Wireless: Supported AirDrop: Supported Status: Not Associated Techniques I've tried so far: 1. Set AirPort router channels to 11 and 36 (5GHz) 2. Tape pin 20 3. AtherosFix.kext 4. Custom DSDT (change device label to ARPT, add _DSM method) 5. LegacyAtheros (see http://www.insanelym...dpost&p=1823049 ) 6. IOProbeScore 600 -> 500 in AirPortAtheros40.kext 7. Remove OSBundleRequired / Network-Root Kernel logs show: AirPort: Link Down on en1. Reason 1 (Unspecified). en1::IO80211Interface::postMessage bssid changed AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff8020c75000 AtherosNewma40P2PInterface::init() <p2p> role 1 6.588295: performCountryCodeOperation: Not connected, scan in progress[0] 6.594110: setWOW_PARAMETERS:wowevents = 2(1) 6.599861: ATHR: unknown locale: 3a 6.630221: ATHR: unknown locale: 3a 32.162745: ATHR: unknown locale: 3a 36.743831: ATHR: unknown locale: 3a 40.319916: Tx IQ Cal failed(4171) I've pretty much run out of ideas at this point--any suggestions? Link to comment Share on other sites More sharing options...
LatinMcG Posted July 28, 2012 Share Posted July 28, 2012 tape pin 20 is for laptop switch on. likely u have to rebrand in dsdt like ar9285 fix. but id 30 not 2A also someone posted there something about removing Network-root in plist fixed it http://www.insanelym...dpost&p=1826301 1 Link to comment Share on other sites More sharing options...
Chris B! Posted July 28, 2012 Author Share Posted July 28, 2012 likely u have to rebrand in dsdt Any resources I can check out to find out how to do this? Link to comment Share on other sites More sharing options...
LatinMcG Posted July 28, 2012 Share Posted July 28, 2012 Any resources I can check out to find out how to do this? that lil blue text at bottom of my last post. Link to comment Share on other sites More sharing options...
Chris B! Posted July 28, 2012 Author Share Posted July 28, 2012 Yeah, thanks I tried a custom DSDT edit (see original post, now edited) without luck and a few of the other suggestions in the thread. Nothing Link to comment Share on other sites More sharing options...
LatinMcG Posted July 28, 2012 Share Posted July 28, 2012 Quote To solve this problem, Open the info.plist file which is located in the IO80211Family.kext > AirportAtheros40.kext > Contents and delete the following 2 lines <key>OSBundleRequired</key> <string>Network-Root</string> try older 10.6.8 or 10.7.2 kexts for network did u do dsdt irq fix ? have u tried different slot ? buy a different card.. the adapter from New Mini PCI-E to PCI-E Wireless Adapter + 3 antenna WiFi http://www.ebay.com/...i-/330715586187 and a reall apple AR5BXB112 http://www.ebay.com/...?_nkw=ar5bxb112 is your smbios.plist properly made ? model used ? Link to comment Share on other sites More sharing options...
chofete Posted August 28, 2012 Share Posted August 28, 2012 Hello, Have you solve this? I have the same card and having the same problem too. I´ll try my best to solve it, but i need help like you. Thanks. Link to comment Share on other sites More sharing options...
timp Posted September 14, 2012 Share Posted September 14, 2012 Hay Chris B, This may sound obvious, but is there a wireless switch? I saw the same behaviour with the AR9285 card my Dell Vostro 3350 running 10.7.4. The card was detected okay, and would look like it's scanning for networks but the list would always come up empty. Oddly the wifi enabled light on the laptop doesn't always stay in sync with wifi actually being enabled. So after a few days of frustration and many different 802.11 kexts I found the solution was just to press Fn+F2 and wait a few seconds. I really kicked myself when I found this and though may I should go a work with animals or take up gardening rather than continue my interest in computers. I now have WiFi and BlueTooth working.(Although I haven't tested them thoroughly yet.) I'd be interested hearing if you find a solution to getting the DWA-556 working, I've recently bought a AR5BHB112 to use in a HP 8760w, and it seems to have the same problem... It's the same chip I think.. Link to comment Share on other sites More sharing options...
LatinMcG Posted September 17, 2012 Share Posted September 17, 2012 irqs in dsdt need to be removed and the network-root fix in plist Link to comment Share on other sites More sharing options...
timp Posted September 22, 2012 Share Posted September 22, 2012 irqs in dsdt need to be removed and the network-root fix in plist That works? Or is it a suggestion? When you say irqs you meet the _PRT Method on the device or something else? Thanks, Tim. Link to comment Share on other sites More sharing options...
LatinMcG Posted September 23, 2012 Share Posted September 23, 2012 suggestion. That works? Or is it a suggestion? When you say irqs you meet the _PRT Method on the device or something else? Thanks, Tim. hpet and ipic and rtc and so.suggestion as im not sure what else is issue with your install. Link to comment Share on other sites More sharing options...
Recommended Posts