Jump to content

[Guide][EN/FR][OSX 10.6.8] Asus U32U RX19V install guide


p4r4d0x86
 Share

3 posts in this topic

Recommended Posts

Hi all after 2 super quiz to be able to post ;-)

 

I purposed the following beta guide (in english and french but support only in english here I think).

(no QE/CI for the moment, no kext found for AMD APU and not tried to do one neither (hard work))

==> will be updated if a solution is developped/found)

 

Have a good install and please give feedback if you find improvement(s) ;-)

 

### ENGLISH VERSION ###

 

OSX 10.6.8 Install on ASUS U32U-RX019V (No DSDT modification for the moment)

 

Chipset: AMD Hudson-1 / AMD K14

Processor: AMD E450 (Zacate)

Audio: ALC270

LAN: Realtek RTL8168

Video: AMD HD 6320M (integrated to APU)

WLAN: Atheros AR9285

 

To know what you will get by following this HOWTO, please read what I wrote here : http://wiki.osx86pro...ables#Asus_U32U

 

Requirement :

- A working OS X (It can be a virtual one)

- A retail image disk (.dmg) of Snow Leopard (10.6.3)

- The package NawCom modUSB (http://www.osx86.net...-nawcom_cd.html)

- An USB stick (8Go minimum)

 

Steps :

1/ Under the working OSX (It can be a virtual one), format the usb stick with HFS journalised and then restore image disk of SnowLeopard on the USB stick.

HOWTO video :

http://www.youtube.com/watch?v=QIfNzp457jM

 

2/ Restore/Install the NawCom modUSB package on the usb stick.

You have now a bootable SL stick.

 

3/ Start the U32U with the USB stick (enter in BIOS and select stick to start)

Use the following flags to start the installer : arch=i386 busratio=8 GraphicsEnabler=No (force64 ?)

 

Bonus : if you want to get a multiboot sytem, install first Windows by following this guide : http://tonymacx86.bl...-os-x-snow.html

To format the disk in HFS, boot the OSX installer and use disk utility of it. Then reboot, install windows, reboot and start again installer of SL 10.6.3.

 

4/ Install SnowLeopard 10.6.3. The required modifications will be done by NawCom modUSB on the fly to load the required .kexts to support the U32U and will be installed (legacy kernel, Apple ATIATA, VoodooHDA ...).

Before to start install, go in customization and check that GraphicsEnabler is unchecked.

If you forgot, you will have to add the flag "GraphicsEnabler=No" at boot to be able to start.

 

5/ At the end of installation you will be able to restart on your new fesh install of SL.

6/ Update Chameleon with a recent build.

Example : http://www.insanelym...howtopic=231075 ==> latest builbot

7/ Download the combo update 10.6.8 :

http://support.apple.com/kb/DL1399

and the latest legacy kernel from Nawcom :

http://blog.nawcom.c....6.8.v2.pkg.zip

(src : http://blog.nawcom.com/?p=791)

 

8/ Install the 10.6.8 update. DON'T REBOOT. Install the new legacy kernel. Reboot.

 

9/ Install sound : VoodooHDA 2.7.3 installer

http://code.google.c.../downloads/list

In VoodooHDA control pannel : Activate SSE2 whatever

 

10/ Install LAN : Realtek RTL81xx by Lnx2Mac (0.90)

http://lnx2mac.blogs...osx-driver.html

Direct Link : http://bit.ly/pLlD13

 

11/ Install Wifi : Atheros AR9285

http://www.osx86.net...for_10.6.8.html

 

 

Finished, you have a correct SL 10.6.8 Install.

You can do security update and other software ones.

 

 

To test/To improve

- USB3

- SleepEnabler

- To activate graphics acceleration (QE/CI, no kexts available for the moment)

- Microphone/Webcam

...

 

 

### FRENCH VERSION / VERSION FRANCAISE ###

 

Installation d'OSX 10.6.8 sur un ASUS U32U-RX019V (Pas de modification de DSDT pour le moment)

 

Chipset: AMD Hudson-1 / AMD K14

Processeur: AMD E450 (Zacate)

Audio: ALC270

LAN: Realtek RTL8168

Video: AMD HD 6320M

WLAN: Atheros AR9285

 

Pour connaitre ce qui fonctionne à la fin de ce tutoriel, regarder ce que j'ai rajouté ici : http://wiki.osx86pro...ables#Asus_U32U

 

Prérequis :

- Un OS X fonctionnel (virtualisé possible)

- Une image (.dmg) de Snow Leopard (10.6.3) non modifiée (retail)

- Le package NawCom modUSB (http://www.osx86.net...-nawcom_cd.html)

- Une clé USB de 8Go minimum

 

étapes :

1/ Sous le OSX fonctionnel (possiblement virtualisé), formater la clé en HFS journalisé puis restaurer l'image de SnowLeopard sur la clé USB.

HOWTO vidéo :

http://www.youtube.com/watch?v=QIfNzp457jM

 

2/ Restaurer/Installer le package NawCom modUSB sur la clé.

Vous avez Maintenant une clé USB bootable de OSX.

 

3/ Démarrer le U32U sur la clé USB (entrer dans le bios et sélectionner la clé USB pour démarrer dessus)

Utiliser les flags suivant pour démarrer l'installeur : arch=i386 busratio=8 GraphicsEnabler=No (force64 possible ?)

 

Bonus : Si vous voulez faire du multiboot, installez d'abord Windows en suivant le guide : http://tonymacx86.bl...-os-x-snow.html

Pour partitionner en HFS, booter l'installation d'OSX et utiliser l'utilitaire de gestion des disque de l'installeur de SL puis rebooter et installer Windows puis démarrer de nouveau l'installation de SL 10.6.3.

 

4/ Installer SnowLeopard 10.6.3. Les modifications faites par le NawCom modUSB vont charger les .kexts nécessaires à la prise en charge du U32U et les ajouter à l'installation (legacy kernel, Apple ATIATA

VoodooHDA ...).

Avant de commencer l'installation des fichiers, cliquer sur "personalisation" et vérifier/décocher GraphicsEnabler.

Si vous oubliez, il faudra rajouter le flag au boot "GraphicsEnabler=No"

5/ A la fin de l'installation vous pouvez démarrer sur votre OSX fraichement installé.

6/ Mettre à jour Chameleon avec une version récente.

Exemple : http://www.insanelym...howtopic=231075 ==> latest builbot

7/ Télécharger la mise à jour vers 10.6.8 (combo) :

http://support.apple.com/kb/DL1399

et le dernier legacy kernel de Nawcom :

http://blog.nawcom.c....6.8.v2.pkg.zip

(src : http://blog.nawcom.com/?p=791)

 

8/ Installer la mise à jour. NE PAS redémarrer. Installer le legacy kernel. Redémarrer.

 

9/ Installer le son : VoodooHDA 2.7.3 installer

http://code.google.c.../downloads/list

Dans le panneau de configuration de Voodoo HDA : Activer SSE2 jenesaisplusuoi

 

10/ Installer le LAN : Realtek RTL81xx by Lnx2Mac (0.90)

http://lnx2mac.blogs...osx-driver.html

Lien direct : http://bit.ly/pLlD13

 

11/ Installer le Wifi : Atheros AR9285

http://www.osx86.net...for_10.6.8.html

 

 

Voila, un SL 10.6.8 correct.

Vous pouvez faire les mises à jour des autres softs/de sécurité aussi.

 

 

à tester/à faire fonctionner :

- USB3

- SleepEnabler

- Activer l'accélération graphique (pas de kexts pour le moment)

- Microphone/Webcam

...

 

Documentation :

http://darwinx86.net...86/222-le-modcd

http://prasys.info/2...cd-v0-3-is-out/

Link to comment
Share on other sites

  • 11 months later...
  • 9 months later...
 Share

×
×
  • Create New...