vince.vin37 Posted February 15, 2012 Share Posted February 15, 2012 HI This is my config: CPU Info AMD C-50 Processor CPU Speed 996.2 MHz Sound Card Speakers (Conexant High Definit | Display Adapters AMD Radeon HD 6250 Graphics | AMD Radeon HD 6250 Graphics | RDPDD Chained DD | RDP Encoder Mirror Driver | RDP Reflector Display Driver Monitors 1x; Moniteur Plug-and-Play générique | Screen Resolution 1366 X 768 - 32 bit Network Network Present Network Adapters Atheros AR5B95 Wireless Network Adapter (note: ar9285) | Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20) I could like some help from you. I previously installed Leopard iDeneb 1.6 with success but it had very low resolution and unfit to 15,6" (1024), no sound and no wifi (i read atheros ar9285 can only be used from snow leopard) so I gave up iDeneb, and came to iATKOS S3 v2but after I succeded in installing it with busratio=15, now I can't run it when it's installed, because a can see the apple logo and nothing moves.... I customized the install to : -bootloader chameleon rc4 -kernel qoops 10.2 So i need your help to know which code I can run in startup to load my installed OS or what I have to choose if I need to install all again.. thank youuuuuu Link to comment Share on other sites More sharing options...
vince.vin37 Posted February 16, 2012 Author Share Posted February 16, 2012 Now I tried with the HAZARD dvd with -v and can't boot the INSTALL because the screen come blurred and beeps, BEEPS, those ugly beeps.. Link to comment Share on other sites More sharing options...
vince.vin37 Posted February 16, 2012 Author Share Posted February 16, 2012 All right it's loading now. So ACER ASPIRE 5250 users with cpu AMD C-50 need to know they have to run HAZARD 10.6.6i, and hope to fix their Atheros ar9285 and display later And load the DVD and HD always with busratio=18 customize : "kernel" Link to comment Share on other sites More sharing options...
Recommended Posts