absoluteczech Posted June 14, 2011 Share Posted June 14, 2011 Hello everyone. After days of searching i finally decide i would ask here. Since everyone here seems to know more than me I figured why keep pulling my hair out. Im currently running Leopard 10.5.7 and everythings running fine, except for my video cards Quartz Extreme. It says not supported Radeon X1300 Series: Chipset Model: Radeon X1300 Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7146 Revision ID: 0x0000 Displays: VX922: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-Bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Rotation: Supported QuartzGL: Supported Display Connector: Status: No Display Connected everyone on the internet says it should just load properly and there should be no adjustments needed. Any and all information i also find seems to be for 10.5.6 or lower usually 10.5.4 LSPCI says this 01:00.1 Display controller [0380]: ATI Technologies Inc RV515 [Radeon X1300] (Secondary) [1002:7166] but device id says something else? it's a PCI-Express card with DVI connection (which im using) Please help? Hope i didnt leave anything out, if i did please let me know. thanks! Link to comment Share on other sites More sharing options...
absoluteczech Posted June 15, 2011 Author Share Posted June 15, 2011 just wanted to update and say that this morning i updated to 10.5.8 and after it rebooted i had QE enabled and working only had to repair 1 kext (network that got messed up) Hello everyone. After days of searching i finally decide i would ask here. Since everyone here seems to know more than me I figured why keep pulling my hair out. Im currently running Leopard 10.5.7 and everythings running fine, except for my video cards Quartz Extreme. It says not supported Radeon X1300 Series: Chipset Model: Radeon X1300 Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7146 Revision ID: 0x0000 Displays: VX922: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-Bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Rotation: Supported QuartzGL: Supported Display Connector: Status: No Display Connected everyone on the internet says it should just load properly and there should be no adjustments needed. Any and all information i also find seems to be for 10.5.6 or lower usually 10.5.4 LSPCI says this 01:00.1 Display controller [0380]: ATI Technologies Inc RV515 [Radeon X1300] (Secondary) [1002:7166] but device id says something else? it's a PCI-Express card with DVI connection (which im using) Please help? Hope i didnt leave anything out, if i did please let me know. thanks! Link to comment Share on other sites More sharing options...
Recommended Posts