expose Posted August 28, 2010 Share Posted August 28, 2010 This setting working full in my sistem : BIOSTAR AWARD P4M900-M7-SE CPU- Intel dualcore E2160 1.8 GHZ Video- NVIDIA GEFORCE 7300/7200 SE Memory - 3 GB DDRM HDD - 160 GB WD IDE Chipset - VIA NORTHBRIDGE and SATA2 HDD working but you must change in BIOS ... IDE to RAID mode WORKING FULLY !!! Burn dvd -intro in cd-rom - restart - press del - enter in bios - change IDE to RAID - get out press -v to but dvd -- 1. Choose language 2. Click DISK UTILITY ( you'll see the hard drive in left ) 3. Click on hdd in left and ERASE WITH -- OSX EXTENDED JOURNALED ( you can put a name partiton or hdd ) 4. When its finished to erase - CLOSE THE WINDOW 5. Press Continue 6. Next 7. On CUSTOMIZE CHANGE THIS -- Bootloader Chameleon RC5 8. Bootloader options - DON'T TOUCH 9. patches - DON'T TOUCH 10. DRIVERS - MAIN HARDWARE ( choose this ) - from SATA - ONLY VIA SATA/IDE Sound- ONLY APPLE HDA 10.6.2 (because you must download VOODOO 0.2.62 KEXT after to work full audio ) PS2 - APPLE PS2 ( for desktop ) CPU - VOODOO P-STATE VGA - NVIDIA - Natit ( NO EFI ) NETWORK - WIRED - VIA RHINE Click OK INSTALL - and then wait 20 minutes . WHEN IS FINISHED TO INSTALL - press RESTART and get out quickly the DVD from cd-rom WHEN IS TRYING TO BOOT AFTER RESTART - PRESS -V ... and wait You will see the intro - when you see the NETWORK WINDOW put your name and password and give a name to service NO need name on the POPPOE Complete the next windows ... PUT a NAME AND A PASSWORD when you must choose .. When is done 1. CONECT TO INTERNET 2. COPY KEXT VOODOO HDA http://code.google.com/p/voodoohda/ install this pack pkg 0.2.62 RESTART AFTER restart open SISTEM PREFERENCES - SOUND - and set to maxim volume. that's it ! WHEN YOU OPEN THE PC and is buting PRESS the icon OS PRESS. an wait to enter the os AUDIO - WORKING GOOD VIDEO- WORKING GOOD maxim resolution BLURAY- MKV RESOLUTION - GOOD NETWORK GOOD 2 Link to comment Share on other sites More sharing options...
asasinuxp Posted June 4, 2012 Share Posted June 4, 2012 Thank you very much for tutorial ! Link to comment Share on other sites More sharing options...
Recommended Posts