atlee Posted March 7, 2010 Share Posted March 7, 2010 MacOSX 10.6.3 released! Newest AppleHDA.kext v1.8.4fc3 DSDT + BIN PATCHED APPLEHDA Attached is a text document with the DSDT HDEF section just copy and paste into your DSDT. Make sure you change 2x AZAL to HDEF. Attached is also a binpatched AppleHDA. Green - Works Grey - Works Black - Works Orange - Works Linein - Untested Mic rear and Mic Front - Untested Dig In and Out - Untested NEW AS OF 28.05.2010 AppleHDA5OUT_4IN.kext.zip I will be working on getting my videocards HDMI audio which hopefully i also can incorporate into AppleHDA, my next big project Link to comment Share on other sites More sharing options...
atlee Posted March 23, 2010 Author Share Posted March 23, 2010 Everyone please test and tell me if it works, would like some results thanks. Link to comment Share on other sites More sharing options...
spvc500vn Posted March 28, 2010 Share Posted March 28, 2010 I was tried thay but not working on my system. My motherboad is biostar 790gx 128mb with realtek ALC888. Are you have any suggest for me? Thanks Link to comment Share on other sites More sharing options...
atlee Posted March 29, 2010 Author Share Posted March 29, 2010 I was tried thay but not working on my system. My motherboad is biostar 790gx 128mb with realtek ALC888. Are you have any suggest for me? Thanks UPDATED DSDT to work with MacOSX 10.6.3, Also this is for Codec Address 2 of ALC888. You have to go into windows and get your codec verbs from regedit, then if they are different then mine, you have to update my file. My verbs are below: 01471C10 01471D44 01471E01 01471F01 01571C12 01571D14 01571E01 01571F01 01671C11 01671D64 01671E01 01671F01 01771C14 01771D24 01771E01 01771F01 01871C40 01871D9C 01871EA1 01871F01 01971C50 01971D9C 01971EA1 01971F02 01A71C4F 01A71D34 01A71E81 01A71F01 01B71C20 01B71D4C 01B71E21 01B71F02 01C71CF0 01C71D01 01C71E33 01C71F59 01D71C01 01D71DE6 01D71E05 01D71F40 01E71C30 01E71D61 01E71E4B 01E71F01 01F71C60 01F71D71 01F71ECB 01F71F01 to get audio working, You need your Codec verbs from windows if different from mine, DSDT patch, AppleHDA in /System/Library/Extensions and HDAEnabler in /Extra's folder. 700+ Views and no replies, this is my final post to teach other user's anything, leechers are not worth my many hours of hard work. Link to comment Share on other sites More sharing options...
Moto7451 Posted March 31, 2010 Share Posted March 31, 2010 Just wanted to let you know that this works with the Gigabyte GA-EP43-UD3L. By extension is should also work with the EP43-DS3L, EP45-UD3L and similar motherboards. Thanks for the hard work! Link to comment Share on other sites More sharing options...
stenowas Posted March 31, 2010 Share Posted March 31, 2010 Hi, kext still work perfect!!!! Gigabyte EP 45 UD3 LR (alc 888) INTEL C2Q 9400 6 Gb ram ddr2 800 Palit 9800 GT Antec Sonata Elite OSX 10.6.3 Faster and now stable!!!! Thanks Link to comment Share on other sites More sharing options...
AlieN_RUS Posted March 31, 2010 Share Posted March 31, 2010 gigabyte-p31-d3sl doesn't work Link to comment Share on other sites More sharing options...
Common Sense Posted March 31, 2010 Share Posted March 31, 2010 Hi, I have the same mothearboard as you, the kext works perfect but it takes maybe 30 seconds once the desktop show up in order for the sound to start working. Can you please post your legacy kext and your DSDT patch for the HDEF device? Thanks a lot! CS Hi, kext still work perfect!!!! Gigabyte EP 45 UD3 LR (alc 888) INTEL C2Q 9400 6 Gb ram ddr2 800 Palit 9800 GT Antec Sonata Elite OSX 10.6.3 Faster and now stable!!!! Thanks Link to comment Share on other sites More sharing options...
stenowas Posted March 31, 2010 Share Posted March 31, 2010 Hi, I have the same mothearboard as you, the kext works perfect but it takes maybe 30 seconds once the desktop show up in order for the sound to start working. Can you please post your legacy kext and your DSDT patch for the HDEF device? Thanks a lot! CS Sorry but i am a new mac user and i don't know where are this 2 files (?), can you tell me where i can find? Thanks Link to comment Share on other sites More sharing options...
linpo Posted April 1, 2010 Share Posted April 1, 2010 Kext work on my GA-EP35 DS3L Snow 10.6.3 updated. Many thanks. Link to comment Share on other sites More sharing options...
Covernuo Posted April 1, 2010 Share Posted April 1, 2010 My mainboard is MSI P43 NEO-F , ALC888 address 0 , so it can't work on my system? my headphones did not work too... it still need LegacyHDA?" Link to comment Share on other sites More sharing options...
ausweis Posted April 1, 2010 Share Posted April 1, 2010 Everyone please test and tell me if it works, would like some results thanks. WOW...What can I say....All works fine. Thanks for your great work. Sound was the only problem after the 6.3 update. Now everything works. Again Thanks. * HTPC & Desktop both working fine ** If everything fails there is a bit pricy($30) solution : Griffin iMic ..(OSX recognize device right away). OS: SL 10.6.3 Combo Update 64bit .... Working... Much Faster Now MB: GAGIGABYTE GA-EP45-UD3L.. Working Memory: 8GB....Working Video: 9800GT Low Profile...Working with DVI (No problem) Sound:888 ...WORKING thanks to atlee !!!! Keyboard: Microsoft X6.....Working, Mac Keyboard.....Working Mouse: HP VoodooDNA ... Working, Mac Mouse.....Working Link to comment Share on other sites More sharing options...
Morphey Posted April 1, 2010 Share Posted April 1, 2010 Works for me! yes! thanks man Link to comment Share on other sites More sharing options...
atlee Posted April 1, 2010 Author Share Posted April 1, 2010 My mainboard is MSI P43 NEO-F , ALC888 address 0 , so it can't work on my system? my headphones did not work too...it still need LegacyHDA?" Go into your windows and get your codec verbs and i edit the file and give to you. Start > Regedit > Search for PinConfigOverRides Save as TXT and then send to me, I'll change the AppleHDA to work with your card. Link to comment Share on other sites More sharing options...
Covernuo Posted April 2, 2010 Share Posted April 2, 2010 thx a lot bro! get the codec in Linux Codec: Realtek ALC888 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0888 Subsystem Id: 0x14627519 Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=3, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Unsolicited: tag=00, enabled=0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x05 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01014410: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01011412: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01016411: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01012414: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19c40: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19c50: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181344f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214c20: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x4007f603: [N/A] Line Out at Ext N/A Conn = Analog, Color = Other DefAssociation = 0x0, Sequence = 0x3 Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x014b1130: [Jack] SPDIF Out at Ext Rear Conn = Comb, Color = Black DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=17 Processing Coefficient: 0x6000 Coefficient Index: 0x09 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b Link to comment Share on other sites More sharing options...
atlee Posted April 2, 2010 Author Share Posted April 2, 2010 thx a lot bro!get the codec in Linux Codec: Realtek ALC888 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0888 Subsystem Id: 0x14627519 Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=3, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Unsolicited: tag=00, enabled=0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x15 0x15] Connection: 2 0x05 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01014410: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01011412: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d* 0x0e 0x0f 0x26 Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01016411: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e* 0x0f 0x26 Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01012414: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 5 0x0c 0x0d 0x0e 0x0f* 0x26 Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19c40: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19c50: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181344f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214c20: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x4007f603: [N/A] Line Out at Ext N/A Conn = Analog, Color = Other DefAssociation = 0x0, Sequence = 0x3 Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x00000010: OUT Pin Default 0x014b1130: [Jack] SPDIF Out at Ext Rear Conn = Comb, Color = Black DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=17 Processing Coefficient: 0x6000 Coefficient Index: 0x09 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x25 0x0b I dont need your codec dump, i need this. Start > Regedit > Search for PinConfigOverRides Save as TXT and then send to me, I'll change the AppleHDA to work with your card. Link to comment Share on other sites More sharing options...
sendjunk Posted April 2, 2010 Share Posted April 2, 2010 Hi there, I updated to 10.6.3 and have an EP45-UD3L and am having problems. Do i just drag the AppleHDA.kext thats on the first post into my Extensions folder (or install using kext utility)? thanks! Link to comment Share on other sites More sharing options...
Covernuo Posted April 2, 2010 Share Posted April 2, 2010 i searched PinConfigOverRides in regedit ,but nothing be found. why? Link to comment Share on other sites More sharing options...
swede420 Posted April 2, 2010 Share Posted April 2, 2010 i searched PinConfigOverRides in regedit ,but nothing be found. why? I have a GA-P35-DS3L V:2.0 with ALC888-0. I did search for what you described but nothing be found too. I did it in windows 7 Professional X64. Link to comment Share on other sites More sharing options...
atlee Posted April 2, 2010 Author Share Posted April 2, 2010 I have a GA-P35-DS3L V:2.0 with ALC888-0. I did search for what you described but nothing be found too.I did it in windows 7 Professional X64. Install Realtek HD drivers and retry it's 100% there in regedit. Link to comment Share on other sites More sharing options...
swede420 Posted April 2, 2010 Share Posted April 2, 2010 Install Realtek HD drivers and retry it's 100% there in regedit. After some searching i managed to get it. However the closest thing i found was PinConfigOverrideVerbs which i managed to convert to this. Reinstalled Realtek HD Codecs and it did not change anything. 01471C10 01471D44 01471E01 01471F01 01571C12 01571D14 01571E01 01571F01 01671C11 01671D64 01671E01 01671F01 01771C14 01771D24 01771E01 01771F01 01871C40 01871D9C 01871EA1 01871F01 01971C50 01971D9C 01971EA1 01971F02 01A71C4F 01A71D34 01A71E81 01A71F01 01B71C20 01B71D4C 01B71E21 01B71F02 01C71CF0 01C71D01 01C71E33 01C71F59 01D71CF0 01D71D11 01D71E11 01D71F41 01E71C30 01E71D61 01E71E4B 01E71F01 01F71C60 01F71D71 01F71ECB 01F71F01 Link to comment Share on other sites More sharing options...
Covernuo Posted April 2, 2010 Share Posted April 2, 2010 I'm already install Realtek HD driver but not PinConfigOverRides found is PinConfigOverrideVerbs useful? verbs.txt Link to comment Share on other sites More sharing options...
fruitfly Posted April 2, 2010 Share Posted April 2, 2010 Much kudos to you for pulling it off. This has fixed audio on my Dell Inspiron 530 after 10.6.3 upgrade. Link to comment Share on other sites More sharing options...
Azimutz Posted April 2, 2010 Share Posted April 2, 2010 (edited) Yep.. search for "PinConfigOverrideVerbs" or just "PinConfig" and you will find them. Some nice info on how to handle this stuff here. @atlee.. i don't use or mess with AppleHDA stuff in a long time (been using VoodooHDA) so, i had to go dig on my AppleHDA chest. First some remarks: - the dsdt you posted works for you?? afaik that's not correct. - no need for HDAEnabler when using this on DSDT! This does the injection, no need for another injector. - it's not mandatory to install AppleHDA.kext into S/L/E. I'm testing this on Extra/Extensions.mkext, with dependencies there of course. So, i didn't expected this kext to work for me (it doesn't). Though i also have ALC888 codec #2, our PinConfig's are a bit different; this is mine: <01471C10 01471D41 01471E01 01471F01 01571C12 01571D11 01571E01 01571F01 01671C11 01671D61 01671E01 01671F01 01771C14 01771D21 01771E01 01771F01 01871C40 01871D99 01871EA1 01871F01 01971C42 01971D9C 01971EA1 01971F02 01A71C41 01A71D3C 01A71E81 01A71F02 01B71C20 01B71D4C 01B71E21 01B71F02 01C71C4F 01C71D31 01C71E81 01C71F01 01D71CF0 01D71D11 01D71E11 01D71F41 01E71C30 01E71D61 01E71E44 01E71F01 01F71C60 01F71D11 01F71EC4 01F71F01> I get these sound assertions at startup.. Apr 2 13:47:35 localhost kernel[0]: Sound assertion "fGPIOCount <= number" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAFunctionGroup.cpp" at line 1552 goto Exit Apr 2 13:47:35 localhost kernel[0]: Sound assertion "0 != mAudioFunctionGroup->isGPIOIdentifierValid ( gpioNumber )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAFunctionGroupExternalControl_GPIO.cpp" at line 76 goto Exit Apr 2 13:47:35 localhost kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAFunctionGroup.cpp" at line 1279 goto handler Apr 2 13:47:35 localhost kernel[0]: Sound assertion "0 != fAudioFunctionGroup->setExternalControlForDefaultDeviceTypeAndTag ( true, defaultDeviceType, pinUnsolicitedTag )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAPathSet.cpp" at line 87 goto Exit Apr 2 13:47:35 localhost kernel[0]: Sound assertion "!pathSet->initPathSetFromXML ( pathSet_aArrayOfPathArrays, fHDAFunctionGroup )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAEngine.cpp" at line 989 goto Exit Apr 2 13:47:35 localhost kernel[0]: Sound assertion "0 != buildPathSets ( pathGroupArray )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDAEngine.cpp" at line 264 goto Exit Apr 2 13:47:35 localhost kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDADriver.cpp" at line 1719 goto Exit Apr 2 13:47:35 localhost kernel[0]: Sound assertion "0 != createAudioEngines ( fPathMap_aDriverInstance )" failed in "/SourceCache/AppleHDA/AppleHDA-184.4.3/AppleHDA/AppleHDADriver.cpp" at line 203 goto Exit ... this info on System Profiler... Intel High Definition Audio: Device ID: 0x103C2A50 Audio ID: 12 Available Devices: Line Out: Connection: 1/8-Inch Jack External Microphone: Connection: 1/8-Inch Jack Headphone: Connection: 1/8-Inch Jack S/P-DIF Out: Connection: RCA S/P-DIF In: Connection: RCA ... but no outputs/inputs on Audio pref pane. Now, i'm stuck at this point. I'd love to be able to fix this stuff by my self but it's pretty confusing to me. Tried a lot of times, but i still don't have the skills to do it and as the solutions available always gave at least Stereo out, i've been leaving this audio stuff for last. I also have a USB audio interface but, that's another pain in.. it works fine, i just can't use it all the time because of lack of space (atm). So, can you patch the driver for my config? No hurry on my side.. when you have time and will. Anyway, i understand if you "don't want to/can't" do it Thanks Edited May 5, 2010 by Azimutz Link to comment Share on other sites More sharing options...
atlee Posted April 3, 2010 Author Share Posted April 3, 2010 I'm currently working on a cleaner version of AppleHDA, I have tested HP, Green Lineout, Orange, Black, grey Lineouts all work 100% I cannot test Digital In/Out but i will test Mic/Mic front and LineIn In my new version verbs will change and also Pathmaps slightly so switch from HP to Green lineout can auto switch. Link to comment Share on other sites More sharing options...
Recommended Posts