Leopard on VAIO P(VGN-P90HS) working!, US15W chipset Options

[ryuu123]

Hi,

now it works!!

based on retail 10.5.6 + vanilla 9.6

VAIO P(VGN-P90HS)
o CPU: Z540
o US15W:
o ATA(+SATA SSD)
o USB(EHCI,UHCI)
x GMA500(1600x768/no QE/QI)
x ALC262(noisy sound with VoodooHDA)
? LAN:Yukon2?
x WLAN:Atheros AR928X/AR5B91 <- I gave up binary patching to AirPortAtheros... and will buy Dell 1510
o Memory Stick :-p
o SD card
o Bluetooth
o WebCAM
o 3G modem <- see post #28( maccosmo )
? Suspend/resume

o:working/x:have problem/?:not yet tested

Files you need: http://www.mediafire.com/file/mhjmzjgznz3/vaiop-alpha-0.zip
ioreg: http://www.mediafire.com/file/4ulmnziadyy/ioreg-vaiop.txt

*** update ***
For 10.5.7
http://www.mediafire.com/file/gyeqmmxzy2q/vaiop-alpha-1.zip
- this "boot" also work with 10.5.6 and can read /DSDT.aml and /Extra kexts.
(but needs kernel option "Graphics Mode")
- Improve USBEHCI stablity( based on 10.5.7 IOUSBFamily )
- brightness can adjustable through PCIFix.kext's Info.plist
***

 vaiop.jpg ( 83.64K ) Number of downloads: 669


AppleUSBEHCI.kext
- fix up pci memory address and force taken control form BIOS(for vaio p only)

AppleIntelPIIXATA.kext
- US15W fitting(generic)
- correct checksum of Inquirey reply(for SSD SATA adapter)
(mayby, this is also useful for other US15W based machine and VMWare IDE and IDE->SATA adapter)

PCIFix.kext
- GMA500's memory address fix for VESA(generic -> see post #17)
- set brightness to 50%

boot
- enable VESA3.0 modes(generic)
(mayby, this is also useful for some laptops)
*I don't have PCEFI V9/Chameleon2's source, this is based on Chameleon1

[boot options]
- need "cpus=1"
(with 10.5.7 boot also need "Graphics Mode" )


--
- devices left
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 06)
Subsystem: Sony Corporation Device [104d:9039]

01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Device [11ab:4380] (rev 10)
Subsystem: Sony Corporation Device [104d:9039]

- devices give up
02:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:002a] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e007]

[maccosmo]

Hi,

it's amazing that it works!

Can you tell me how fast it is?
I know its not like a new mac book pro - but textmate should work without problems, right?

I haven't managed to boot os 10.5.6 from a usb thumbdrive with your kext and boot file(s) on my p.

Do you have the time to help me out, please?
I installed Mac OS 10.5.6 on a thumbdrive with my macbook and moved "PCIFix.kext", "IOATAFamily.kext" and "IOUSBFamily.kext" from your zip file to "/System/Library/Extensions/".
I also copied the "boot" file to the root of my disk.
Where do I get the "AppleIntelPIIXATA" kext file?

I tried booting with -v -cpus=1 but I get "still waiting on root device" - when I search for the message I get a lot of results - but I can't pass the message with the tips i get.


My vaio p is an european p11z/q with 60gb hdd.



sorry for my english and being a noob.

[rnglad]

What about 3G modem? is it working?

How's the speed of the system, is it better than with `vista or Windows7 ?

[ryuu123]

@maccosmo
AppleIntelPIIXATA is in IOATAFamily.kext/Contents/Plugins directory.
so what you doing is right.

I install leopard without USB drive.
so not sure, try below boot options.

-v cpus=1 -f rd=disk0s1 or
-v cpus=1 -f rd=disk1s1 or
-v cpus=1 -f rd=disk2s1 or
-v cpus=1 -f rd=disk3s1

diskXsY .. X Y is depend on BIOS setting and thumbdrive partitioning.

If you see some USBEHCI error, post the message here.

I didn't mention but also need some OSX86 standard kexts.
- dsmos, IntelCPUPMDisabler, PS2Nub, PS2Controller
- Voodoopower, SMIOS, etc ..

@rnglad
My model didn't have 3G modem. so I cannot try. :-P
but USB 3G modem is working.

I feel faster than Vista, I don't know win7 so can't compare.
but for me, leopard on p is enough fast :-P (safari,mail and text edit)

I feel ...
faster <------------> Slowwww
Linux >> Leopard >>>>>>> Vista

[maccosmo]

thanks a lot!
as soon as i can, i will try your suggestions.

you rock!

[maccosmo]

ok - now it works - more or less (more less) ^^.

i've installed chameleon 2 rc1 and a few kexts into the extra folder and now it boots to my desktop with the "-v cpus=1 -f rd=disk1s2" parameters.
the finder and other apps are pretty fast even from a sdhc card.

with chameleon 1 and your boot file i get a usbehci error like you mentioned - i will post the messages later this day.

my current resolution is 1024x768 (with chameleon 2 rc1).
i hope for an easy solution for the usbehci problem so i can enjoy your boot file .


could you do me a favour? it would be really nice if you could post the content of your extensions folder(s) with the kexts you are using.
fastest way: cmd + a, cmd + c and cmd + v into this topic ^^

like this:
...
AppleIntelCPUPowerManagement.kext
AppleK2SATA.kext
AppleIntelGMAX3100VADriver.bundle
AppleIntelIntegratedFramebuffer.kext
AppleIRController.kext
AppleK2.kext
AppleK2Driver.kext
AppleK2Fan.kext
...

thanks!

[ccarrieta]

Hi ryuu123 i have an American version sony p and I have been trying to install leopard since I bought it. I am kind of a noob so, could you please post or PM instructions on how to install it ?

Thanks in Advanced...

[ryuu123]

@maccosmo
Currently,
To get 1600x768, there is no way without using my chameleon 1 based "boot".
so /Extra doesn't work.

I sent my patch to "Chamelon Team" and got reply "accept your patch and wait next release..."
so, I'm waiting next Chamelon release too.

My /System/Library/Extentions modification is ..

add ->
AppleACPIPS2Nub.kext
ApplePS2Controller.kext
AppleSMBIOS.kext <- netkas's one
IOATAFamily.kext <- overwrite IOATAFamily.kext/Contents/PlugIns/AppleIntelPIIXATA.kext
IOUSBFamily.kext <- overwrite IOUSBFamily.kex/Contents/PlugIns/AppleUSBEHCI.kext
IntelCPUPMDisabler.kext
OpenHaltRestart.kext
PCIFix.kext
UUID.kext
VoodooBattery.kext
VoodooHDA.kext
VoodooPower.kext
dsmos.kext

delete ->
AppleTyMCEDriver.kext <- 10.5.7 :-p

I'll post USBEHCI messages helper to next.



AppleUSBEHCI messsage and trouble shooter. :-p

"AppleUSBEHCI[xxx]::UIMInitialize - unable to get device memory"

<- faild overwrite kext.
-> re-overwrite AppleUSBEHCI whit attached one.

"AppleUSBEHCI[xxx]: unable to get filterInterruptEventSource"

<- this is my noob. 10 tims 1 or 2 this message appear and out of work.
-> try shutdown and restart.

"AppleUSBEHCI[xxx]::UIMInitialize - could not get chip to halt within 100 ms"

<- someting wrong. model specific difference or some thing wrong
-> no way.(or boot linux and send me lspci -vvnn)

"EHCI controller unable to take control from BIOS"

-> normal message with version alpha-0 :-p
-> nothing to do.

I continue work to stabilize EHCI.
wait for update.

[maccosmo]

i love you

yesterday (a few hours ago) i installed leopard on an another usb flash drive, installed your kexts, chameleon 1 and your boot file .. - and surprize, surprize - this time it worked - dont know what was wrong.

thanks for your kexts list by the way - i was missing my trackpoint. the kexts i tried didn't work.

os x on this machine and 1600x768 looks amazing.

EDIT: trackpoint + battery indicator work now - thanks.

[ryuu123]

@maccosmo


enjoy vaio P

Hi ryuu123 i have an American version sony p and I have been trying to install leopard since I bought it. I am kind of a noob so, could you please post or PM instructions on how to install it ?

Thanks in Advanced...

@ccarrieta

My Install Procedure is ...

(0. make vaio recovery DVD disks.)
1. shurink VISTA partition from VISTA with diskpart.
2. boot from gparted live cd.
3. create two hfs partitions on empty area(#3:16G,#4:10G)
4. format partition #4 hfs.
5. copy entire retail dvd to partition #4(be careful copied files uid/gid)
6. copy osx86 standard kexts( dsmons, ps2 and etc...)
7. copy vaio p specific kexts( download topic link)
8. replace OSInstall.mpkg to enable MBR partition install.
9. append boot options to com.apple.Boot.plist, "cpus=1 rd=disk0s4")
10. install bootloader( mbr and pbr and /boot )
11. boot leopard installer from partition #4
12. install leopard to partiton #3
13. before reboot, install and overwrite kexts on pattions #3(installed #4 step 6. 7.)
14. append boot options to com.apple.Boot.plist, "cpus=1 rd=disk0s3")

this method saves VISTA and Instant mode.
but so complex.

I hope someone find more easy way and post here

[maccosmo]

this is how to install mac os on an usb flash drive - this method will not alter your internal harddisk:

what you need:
1. an usb flash drive - 8 gb minimum
2. an intel mac
3. a retail mac os dvd (tried with mac os 10.5.6 retail)
4. a sony vaio p
5. the chameleon 1 installer
6. ryuu123's kexts and boot file + the kexts you need to get additional components running (see ryuu123's list).

1. boot your intel mac with the retail leopard setup dvd, format your usb drive (mac os extended (journaled)) and start the installation
2. when done, boot from usb drive and install chameleon 1 with the installer
3. install the kexts you need
4. copy ryuu123's boot to the root of your flash drive
5. edit the com.apple.Boot.plist, set the kernel flag to "-v cpus=1 rd=disk1s2 -f" and repair permissions (-v and -f is not necessary - but if something went wrong for the first boot, its good to know what the problem is)
6. unplug your usb flashdrive from your mac, plug it into your vaio p
7. boot and enjoy

[ugokind]

HY
I tried to use your pcifix into my packard bell DOTM
it has gma500.. the id is:
ven_8086 DEV_8108 SUBSYS_02561025

what are the values to change into your plist?
it's the pci match?

I see the light quite lower at boot due to the 80% brightness value.. but no video shell!!

can you help me?

ugo

[maccosmo]

SUBMarcos:

if possible a video will be great, just to see how it handles pdfs.
thx

http://www.youtube.com/watch?v=ykSKdhl3DwI

hope it helps

[ugokind]

wow
we use the same pen!! is very quickly.. yes?
then.. now i gave up the laptop.. but in italy there are many people which are very happy to continue my job
the pcifix.kext seems to load the video card.. the log report a lot of good data.. but the video didn't start.. it remain in text mode

then I'm sure that the problem is the pcimatching in the plist

this is the job

http://www.insanelymac.com/forum/index.php...t&p=1170437

[ryuu123]

Hi,

what are the values to change into your plist?
it's the pci match?

It's using pci class match, so no need to add vendor id or device id.

PCIFix does VAIO P specific memory address fix.

this is VAIO's message ->

kernel[0]: bootDisplay: 1600 x 768 x 32 addr:0x7f800000 offs:00000000
kernel[0]: PCIFix: BAR0: 94200000
kernel[0]: PCIFix: BAR1: 00006071
kernel[0]: PCIFix: BAR2: 80000000
kernel[0]: PCIFix: BAR3: 94280000
kernel[0]: PCIFix: prop 0: 94200000
kernel[0]: PCIFix: prop 1: 00006070
kernel[0]: PCIFix: prop 2: 7f800000
kernel[0]: PCIFix: prop 3: 94280000
kernel[0]: PCIFix: setting memory

OSX's VESA driver can't mep memory, because
bootDisplay(VESA) frame buffer address(addr:0x7f800000) is
out of device memory address(80000000)

so PCIFix do replace 80000000 with VESA's address.

I guess 80000000 is for VAIO P and ur laptop have different value.

can u post PCIFix's message?

[ugokind]

Hi,



It's using pci class match, so no need to add vendor id or device id.

PCIFix does VAIO P specific memory address fix.

this is VAIO's message ->

kernel[0]: bootDisplay: 1600 x 768 x 32 addr:0x7f800000 offs:00000000
kernel[0]: PCIFix: BAR0: 94200000
kernel[0]: PCIFix: BAR1: 00006071
kernel[0]: PCIFix: BAR2: 80000000
kernel[0]: PCIFix: BAR3: 94280000
kernel[0]: PCIFix: prop 0: 94200000
kernel[0]: PCIFix: prop 1: 00006070
kernel[0]: PCIFix: prop 2: 7f800000
kernel[0]: PCIFix: prop 3: 94280000
kernel[0]: PCIFix: setting memory

OSX's VESA driver can't mep memory, because
bootDisplay(VESA) frame buffer address(addr:0x7f800000) is
out of device memory address(80000000)

so PCIFix do replace 80000000 with VESA's address.

I guess 80000000 is for VAIO P and ur laptop have different value.

can u post PCIFix's message?

here you are.. repeat.. I gave up the lappie.. but I have my usb pen.


Jun 6 19:59:27 ugos-imac kernel[0]: GFX0: family specific matching fails
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: 8086:8108
Jun 6 19:59:27 ugos-imac kernel[0]: bootDisplay: 1024 x 768 x 32 addr:0x3f800000 offs:00000000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: BAR0: b0080000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: BAR1: 00001801
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: BAR2: c0000000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: BAR3: b0000000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: prop 0: b0080000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: prop 1: 00001800
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: prop 2: c0000000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: prop 3: b0000000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: setting memory

this is written 2 times.. one after the .. got boot device
the second at the end.. after the

Login Window Application Started --

[ryuu123]

Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: BAR2: c0000000
Jun 6 19:59:27 ugos-imac kernel[0]: PCIFix: prop 2: c0000000

@ugokind
try this

 pcifix.zip ( 18.29K ) Number of downloads: 219


if u don't give up.

[ugokind]

@ugokind
try this

 pcifix.zip ( 18.29K ) Number of downloads: 219


if u don't give up.

thanks!!
i can't reply.. I must wait 2 weeks.. before having another one.
but. thanks!
but.. you're a developer!

[maccosmo]

*** update ***
For 10.5.7
http://www.mediafire.com/file/gyeqmmxzy2q/vaiop-alpha-1.zip
- this "boot" also work with 10.5.6 and can read /DSDT.aml and /Extra kexts.
- Improve USBEHCI stablity( based on 10.5.7 IOUSBFamili )
- brightness can adjustable in PCIFix.kext's Info.plist
***

 vaiop.jpg ( 83.64K ) Number of downloads: 669

hi ryuu123,

i tried your updated boot file but the resolution changed back to 1024x768 - do you know what's wrong?

thanks!

[ryuu123]

hi ryuu123,

i tried your updated boot file but the resolution changed back to 1024x768 - do you know what's wrong?

thanks!

Ahh...I forgot mention.

I made "boot" more *GENERIC*,so changed default to 1024x768 from 1600x768.

New boot needs an option "Graphics Mode"="1600x768x32" as below.

in /Library/Preferences/SystemConfiguration/com.apple.Boot.plist

<key>Kernel Flags</key>
<string>cpus=1 "Graphics Mode"="1600x768x32"</string>

or

<key>Graphics Mode</key>
<string>1600x768x32</string>
.

thx