Daniel G Posted February 8, 2009 Share Posted February 8, 2009 I installed on my laptop Processor Support Intel® Merom 65nm & Penryn 45nm socket P mobile processor Chipset Intel® PM965 + ICH8-M Graphics & Video Module NVIDIA® 8400M-G 256MB on board Main Memory DDR2 533/667 SO-DIMM x 2 slots,MAX: 4GB (with bios v1.10 updated) Display 15.4" WXGA ( 1280 x 800 ) PC Cards Slot x1 Card Reader SD/MMC/MS/MS-Pro 4-in-1 Card Reader Hard Disk Drive Supports SATA HDDSupports SATA HDD Optical Drive Built-in Super-Multi Drive (supports DVD RAM) LAN/Modem Realtek Gigabit LAN + 56K Modem Wireless LAN Supports Intel® PCI-Express mini card 4965 & 3945 Bluetooth Built-in MS-6837D Bluetooth 2.0 + EDR USB Module Rovson support No Built-in CMOS Camera 1.3 Mega Pixels TPM Not available Security Feature None I/O Ports • Express Card : 1 • Monitor ( VGA ) : 15 pin D-Sub x 1 • USB 2.0 : 4 • IEEE 1394 : 1 • MIC-in : 1 • Headphone out : 1 • RJ11 : 1 • RJ45 : 1 • TV-Out : S-Video x 1 Audio Realtek ALC 888H i used for custom install ICHx Fixed JMicronATA ACPI-FIX Cpus=1 - Fix Power Management PowerOff Fix Realtek ALC 888 Nvinject 0.2.1 256M Application All - except ASU After install boot with option: -v -f -cpus=1 for sound to work in System Preferences -> Sound -> Output -> select internal speakers for video as you can see Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0428 Revision ID: 0x00a1 ROM Revision: NVinject 0.2.1 Displays: Display: Resolution: 1280 x 800 Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected for wireless the drivers are in testing, network work by default, DVD it does seen. Daniel Link to comment Share on other sites More sharing options...
gouvy Posted February 15, 2009 Share Posted February 15, 2009 Hello, I tried and install succesfully iDened 1.3, thanks to your explanation. I also have xp sp3 install on my laptop (msi ex600). I don't have any sound. I choose Realtek alc 888 and internal speakers. What can I do ? You also write about wireless drivers. When do you plan to release it ? Or where can I download them. Thanks Gouvy Link to comment Share on other sites More sharing options...
satch_yt Posted February 19, 2009 Share Posted February 19, 2009 Hello I have MSI EX600 (MS-1636X), and iDeneb 1.3 10.5.5, i've been trying to install macos on this laptop but I still can not get past the error "still waiting for root device" I know it's the most common error, and I know some ways to fix it, I installed on MacOs my Desktop Pc before, and I was able to fix this error then, but on this laptop I can not fix it, there are not much options in BIOS aswell, (I partitioned the HD as FAT32, HFS+, makes no difference) any suggestions? Link to comment Share on other sites More sharing options...
Daniel G Posted February 19, 2009 Author Share Posted February 19, 2009 maybe you have different soundcard, try all others audio drivers from Realtek alc 888 from install CD open using application pacifist under ideneb application folder. Daniel+ Hello, I tried and install succesfully iDened 1.3, thanks to your explanation. I also have xp sp3 install on my laptop (msi ex600). I don't have any sound. I choose Realtek alc 888 and internal speakers. What can I do ? You also write about wireless drivers. When do you plan to release it ? Or where can I download them. Thanks Gouvy try first to see if the ID of harddisk is on the list of release,if it is this shoud work: the harddisk is detected with iDeneb 10.5.5 booting press F8 at prompt just type -s then use what it says the 2 lines : /sbin/fsck -fy /sbin/mount -uw / then type exit and graphical starts use disk utilities and i see my hard drive with all partition. Hello I have MSI EX600 (MS-1636X), and iDeneb 1.3 10.5.5, i've been trying to install macos on this laptop but I still can not get past the error "still waiting for root device" I know it's the most common error, and I know some ways to fix it, I installed on MacOs my Desktop Pc before, and I was able to fix this error then, but on this laptop I can not fix it, there are not much options in BIOS aswell, (I partitioned the HD as FAT32, HFS+, makes no difference) any suggestions? Link to comment Share on other sites More sharing options...
satch_yt Posted February 19, 2009 Share Posted February 19, 2009 Sorry but where do I enter these commands? when I enter -s after F8 in darwin boot, it continues as usual, where do I enter the commands /sbin etc? maybe you have different soundcard, try all others audio drivers from Realtek alc 888from install CD open using application pacifist under ideneb application folder. Daniel+ try first to see if the ID of harddisk is on the list of release,if it is this shoud work: the harddisk is detected with iDeneb 10.5.5 booting press F8 at prompt just type -s then use what it says the 2 lines : /sbin/fsck -fy /sbin/mount -uw / then type exit and graphical starts use disk utilities and i see my hard drive with all partition. Link to comment Share on other sites More sharing options...
Daniel G Posted February 19, 2009 Author Share Posted February 19, 2009 boot with DVD,then press F8 at prompt just type -s then use those 2 commands: /sbin/fsck -fy /sbin/mount -uw / then type exit and graphical starts use disk utilities and i see my hard drive with all partition Daniel Sorry but where do I enter these commands? when I enter -s after F8 in darwin boot, it continues as usual, where do I enter the commands /sbin etc? Link to comment Share on other sites More sharing options...
satch_yt Posted February 19, 2009 Share Posted February 19, 2009 that is exactly what I do, I boot with dvd, press f8, type -s, and hit enter, but then it doesn't let me enter any commands, just continues with the installer. Link to comment Share on other sites More sharing options...
Daniel G Posted February 19, 2009 Author Share Posted February 19, 2009 it should continue with the install but in the black console let it load all and then it stop and you may enter the comands,there shouldn't be any graphical enviroment. Daniel that is exactly what I do, I boot with dvd, press f8, type -s, and hit enter, but then it doesn't let me enter any commands, just continues with the installer. Link to comment Share on other sites More sharing options...
satch_yt Posted February 19, 2009 Share Posted February 19, 2009 it continues to load but then it gets stuck again at "still waiting for root device", it doesn't let me enter any commands. anyway thanks for your replies, I think I gave up. it should continue with the install but in the black console let it load alland then it stop and you may enter the comands,there shouldn't be any graphical enviroment. Daniel Link to comment Share on other sites More sharing options...
Daniel G Posted February 19, 2009 Author Share Posted February 19, 2009 try write to this forum http://www.ideneb.insanelymac.net/ they will take your id of hardisk controler and give you a patch or make it work in the next release. get the id with everest/aida. Daniel it continues to load but then it gets stuck again at "still waiting for root device", it doesn't let me enter any commands. anyway thanks for your replies, I think I gave up. Link to comment Share on other sites More sharing options...
satch_yt Posted February 19, 2009 Share Posted February 19, 2009 thanks, I'll do that Link to comment Share on other sites More sharing options...
Doctors Posted June 1, 2009 Share Posted June 1, 2009 hello, im running ideneb 10.5.5 on my msi ex600x. everything works apart from wifi (gonna use wifi from friends discarded macbook- the airport extreme) Tho, is there any way/fix for leo to use both cores? since in system profiler ther is "Total number of cores: 1". Does that mean the system is runing like core 2 solo (single core cpu)? Link to comment Share on other sites More sharing options...
matejkobza Posted September 17, 2009 Share Posted September 17, 2009 I have to share what i founded out. I have installed iDeneb 1.3 on my laptop MSI ex600, everything works great i think. After many distributions which actually didnt work, this one works! I was a litle bit disappointed, when i revealed, my wifi isnt working. So i began to search on the internet and i founded this: http://code.google.com/p/iwidarwin/ now my wifi works, but only with free unsecured networks. Still its more than nothing and thats enough for me! BTW: installation performed without any errors, and at the reboot there was no kernel panic. Link to comment Share on other sites More sharing options...
Daniel G Posted November 21, 2009 Author Share Posted November 21, 2009 hello, im running ideneb 10.5.5 on my msi ex600x. everything works apart from wifi (gonna use wifi from friends discarded macbook- the airport extreme) Tho, is there any way/fix for leo to use both cores? since in system profiler ther is "Total number of cores: 1". Does that mean the system is runing like core 2 solo (single core cpu)? "Total number of cores: 1" can be fixed installing snow leopard Link to comment Share on other sites More sharing options...
chencho Posted November 24, 2009 Share Posted November 24, 2009 Hi. I have a LG E500 (with motherboard from MSI EX600). Does Snow Leopard works fine with it? Any kext needed to install? Someone made a retail installation instead ideneb? Link to comment Share on other sites More sharing options...
d.u.o Posted February 9, 2010 Share Posted February 9, 2010 Hy, I also have an MSI EX600 with the same configuration, except the hard drive is IDE(PATA) Processor Support Intel� Merom 65nm & Penryn 45nm socket P mobile processor Chipset Intel� PM965 + ICH8-M Graphics & Video Module NVIDIA� 8400M-G 256MB on board Main Memory DDR2 533/667 SO-DIMM x 2 slots,MAX: 4GB (with bios v1.10 updated) Display 15.4" WXGA ( 1280 x 800 ) PC Cards Slot x1 Card Reader SD/MMC/MS/MS-Pro 4-in-1 Card Reader Hard Disk Drive Supports SATA HDDSupports SATA HDD Optical Drive Built-in Super-Multi Drive (supports DVD RAM) LAN/Modem Realtek Gigabit LAN + 56K Modem Wireless LAN Supports Intel� PCI-Express mini card 4965 & 3945 Bluetooth Built-in MS-6837D Bluetooth 2.0 + EDR USB Module Rovson support No Built-in CMOS Camera 1.3 Mega Pixels TPM Not available Security Feature None I/O Ports • Express Card : 1 • Monitor ( VGA ) : 15 pin D-Sub x 1 • USB 2.0 : 4 • IEEE 1394 : 1 • MIC-in : 1 • Headphone out : 1 • RJ11 : 1 • RJ45 : 1 • TV-Out : S-Video x 1 Audio Realtek ALC 88 I've tried ti install mac exactlly how you descriebd, but i didn't managed to install. After instalation the sistem freezes and it doe's nothing. Can you help me please. I'm triyng for a while now to install mac. Thank You end pardon my english. I installed on my laptopProcessor Support Intel� Merom 65nm & Penryn 45nm socket P mobile processor Chipset Intel� PM965 + ICH8-M Graphics & Video Module NVIDIA� 8400M-G 256MB on board Main Memory DDR2 533/667 SO-DIMM x 2 slots,MAX: 4GB (with bios v1.10 updated) Display 15.4" WXGA ( 1280 x 800 ) PC Cards Slot x1 Card Reader SD/MMC/MS/MS-Pro 4-in-1 Card Reader Hard Disk Drive Supports SATA HDDSupports SATA HDD Optical Drive Built-in Super-Multi Drive (supports DVD RAM) LAN/Modem Realtek Gigabit LAN + 56K Modem Wireless LAN Supports Intel� PCI-Express mini card 4965 & 3945 Bluetooth Built-in MS-6837D Bluetooth 2.0 + EDR USB Module Rovson support No Built-in CMOS Camera 1.3 Mega Pixels TPM Not available Security Feature None I/O Ports • Express Card : 1 • Monitor ( VGA ) : 15 pin D-Sub x 1 • USB 2.0 : 4 • IEEE 1394 : 1 • MIC-in : 1 • Headphone out : 1 • RJ11 : 1 • RJ45 : 1 • TV-Out : S-Video x 1 Audio Realtek ALC 888H i used for custom install ICHx Fixed JMicronATA ACPI-FIX Cpus=1 - Fix Power Management PowerOff Fix Realtek ALC 888 Nvinject 0.2.1 256M Application All - except ASU After install boot with option: -v -f -cpus=1 for sound to work in System Preferences -> Sound -> Output -> select internal speakers for video as you can see Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0428 Revision ID: 0x00a1 ROM Revision: NVinject 0.2.1 Displays: Display: Resolution: 1280 x 800 Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected for wireless the drivers are in testing, network work by default, DVD it does seen. Daniel Link to comment Share on other sites More sharing options...
Daniel G Posted February 9, 2010 Author Share Posted February 9, 2010 i understand that install did gone well, and after restart syten freeze? if so try boot press F8 at comand prompt write -v -f -F -x and make a photo or tell last line where it does freeze, maybe the one writing Still waiting for root device maybe. Daniel Hy,I also have an MSI EX600 with the same configuration, except the hard drive is IDE(PATA) Processor Support Intel� Merom 65nm & Penryn 45nm socket P mobile processor Chipset Intel� PM965 + ICH8-M Graphics & Video Module NVIDIA� 8400M-G 256MB on board Main Memory DDR2 533/667 SO-DIMM x 2 slots,MAX: 4GB (with bios v1.10 updated) Display 15.4" WXGA ( 1280 x 800 ) PC Cards Slot x1 Card Reader SD/MMC/MS/MS-Pro 4-in-1 Card Reader Hard Disk Drive Supports SATA HDDSupports SATA HDD Optical Drive Built-in Super-Multi Drive (supports DVD RAM) LAN/Modem Realtek Gigabit LAN + 56K Modem Wireless LAN Supports Intel� PCI-Express mini card 4965 & 3945 Bluetooth Built-in MS-6837D Bluetooth 2.0 + EDR USB Module Rovson support No Built-in CMOS Camera 1.3 Mega Pixels TPM Not available Security Feature None I/O Ports • Express Card : 1 • Monitor ( VGA ) : 15 pin D-Sub x 1 • USB 2.0 : 4 • IEEE 1394 : 1 • MIC-in : 1 • Headphone out : 1 • RJ11 : 1 • RJ45 : 1 • TV-Out : S-Video x 1 Audio Realtek ALC 88 I've tried ti install mac exactlly how you descriebd, but i didn't managed to install. After instalation the sistem freezes and it doe's nothing. Can you help me please. I'm triyng for a while now to install mac. Thank You end pardon my english. Link to comment Share on other sites More sharing options...
d.u.o Posted February 18, 2010 Share Posted February 18, 2010 Sorry i didn't reply sooner but i had exam's. I've donwloaded from the web the last version of iDeneb, v. 1.5.1 10.5.7 and i installed on a empty partition. I used: ALC888 ICHx Fixed RTL8169/RTL8111 NVinject 256Mb After install i didn't press any key and i got a grey screen with the apple logo. the system stoped here and nothing happend Could you help me please! do you have any idea what i'm doing wrong. Thank you for your time! Link to comment Share on other sites More sharing options...
Daniel G Posted February 18, 2010 Author Share Posted February 18, 2010 Sorry i didn't reply sooner but i had exam's.I've donwloaded from the web the last version of iDeneb, v. 1.5.1 10.5.7 and i installed on a empty partition. I used: ALC888 ICHx Fixed RTL8169/RTL8111 NVinject 256Mb After install i didn't press any key and i got a grey screen with the apple logo. the system stoped here and nothing happend Could you help me please! do you have any idea what i'm doing wrong. Thank you for your time! It's important what errors do you have in debug ing mode i did write you last time try: boot press F8 at command prompt write -v -f -F -x and tell me last error you have Link to comment Share on other sites More sharing options...
d.u.o Posted February 19, 2010 Share Posted February 19, 2010 It's important what errors do you have in debug ing modei did write you last time try: boot press F8 at command prompt write -v -f -F -x and tell me last error you have i will do that but tell me, you want me to use: "boot press F8 at command prompt write -v -f -F -x" before install or after?? Thank's! Link to comment Share on other sites More sharing options...
Daniel G Posted February 19, 2010 Author Share Posted February 19, 2010 i will do that but tell me, you want me to use: "boot press F8 at command prompt write -v -f -F -x" before install or after?? Thank's! use that after install, also i do not understand what did not use what i did testes and worked before as custom install, using maybe same version, just to be sure, i have sow leopard now on it and it goes very well, to see how i did it write in google the words : snow leopard ex600 first post may help you. Link to comment Share on other sites More sharing options...
d.u.o Posted March 1, 2010 Share Posted March 1, 2010 I've managed to install MAC, and i must say it's a whole new world , but i have some problem's. You said that network work's by default. When a create a PPoe connection, no matter what i type in the pass field, the computer says it connect's toi the internet, but safari can't open any page. Even if i type the corect user name and pass it still doesen't connect. Another question is how can i get dual boot, how can i install cameleon?? And another question is how can i use both core's? Thank you for all your help! use that after install, also i do not understand what did not use what i did testes and workedbefore as custom install, using maybe same version, just to be sure, i have sow leopard now on it and it goes very well, to see how i did it write in google the words : snow leopard ex600 first post may help you. What i meant to say"Even if i type the corect user name and pass it still doesen't connect." is that in network connections it say's that i am connected but when i try to open a page it doesen't work. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts