iPC 10.5.6 on ECS G31T-M7 v 1.0 10/100, all success, all working Options

[Babiloe]

[UPDATE 20 NOV 2009]
Hi folks,
after one year.. here the update !!!!

OK,
I have description like this:
ECS G31T-M7 Pcb v.1
BIOS 07/31/2008
Intel Graphics GMA 3100
DDR2 800 MHz 2 GB Single
ICH7 Controller SATA iDE
HD AUDIO [ICH7 + Driver VIA VT1708B ]
Hard Disk IDE Master 40 Gb: Partition 1: XP NTFS; Partition 2: Data FAT32
Hard Disk SATA 250Gb : Partition 1 : Vista NTFS ;2: Data NTFS ; Partition 3: Partitioned at Windows ->Basic Disc not Formated
DVDRW: LG IDE Slave
Lan Card Attansic L2 onboard
Sensor: ITE 8718
PS/2 Logitech Keyboard and PS/2 IR Mouse
OSX86: IPC OSX86 10.5.6 PPF5

What tools to prepare ?
1. DVD ipc 10.5.6
2. Attansic L2 kext for ethernet card
3. DSDT Patcher GUI Windows Dr.Hurt 0.5 beta [you can find on the insanelymac]
4. VoodooHDA kext for audio card VIA ATA
5. PartitionWizard Home for Windows free [for manipulating existing/resizing partition]
6. Macdrive trial [for accessing the hpfs via windows inserting the dsdt.aml]
7. Latest BIOS ECS g31t-m7 1.0 10/100 or matching yours for patching the dsdt.aml [do not use the patched bios, it could kill your bios like i did before]
8. If you use ATA for DVD drive or HDD make sure it is 80 induced supporting ATA-100/133 device [or you can get still waiting / 35 error]
9. Chain0 Loader
MAKE SURE YOU INSTALL on NEW HDD or install. IF NOT MAKE SURE THAT YOU HAVE BACKUP!
Some INSTALLMENT I USED with Hackintosh with MBR scheme may broke the boot of partition 1 installed win7/vista/winxp that can't repaired with original cd boot via fixmbr/fixboot even the partition 1 has activated.

SO for installment in same HDD with installed windows you must separate partition:
Partition 1 [Windows] Partition 2 or 3 [Mac] Other Partition [data]
All data should be move to partition data.
The partition windows and mac should be primary.
Ghost the partition 1 with hirens boot is necessary.

Tool for Accidental for Partition Table Lost, Partition NTFS can not read..]
1. CD hiren's boot just for ghost [do not use or even try other tool , it can make you partition table gone, NTFS lost signature etc...]
2. Paragon Partition manager [more powerful]
3. Active Partition Recovery

You can use any scheme GUI or MBR...

The BIOS working customization set for install:
BIOS ACPI = on [can be off too]
CPU Disable Bit : OFF
CPU EIST : off [update]
CPU Halt : off [update ]

[Note : if you had ATA HDD you can use all set on the top on, weird huh]

Booting from the DVD, with boot flag => cpus=1 -v
Using Utilities -> disk Utilities -> Erase empty Partition 3 SATA 250Gb as HPFS Journaled
Customized Install Driver:
default: Vanilla kernel
GMA x3100 fix driver set checked if you use internal, if you use Nvidia VGA add on pick Nvidia darwin
ICHx SATA driver checked [do not use PIIXATA !!, it will give you error 35]
PS/2 keyboard and/or mouse fix checked [if you use ps/2]
NTFS-3G MacFuse checked [or you can use Paragon NTFS more powerful]
DSDT newHPET checked [update : for fixing the error in System Preferences]
SMBIOS 27 DDR2 800 Mhz or SMBIOS 28 [update : for fixing error in the System Preferences (Configure as your DRAM speed)] or other just for cosmetics
Kexthelper, EfiStudio, OSX86tool should be installed also.
Ethernet and Audio kext updated after installation...
Success install

Post installation alternate 1 if you can goto windows..
1. Goto Bios
The BIOS working customization set for install:
BIOS ACPI = on
CPU Disable Bit : on
CPU EIST : on
CPU Halt : off
2. Goto Windows
3. Install Mac drive
4. Put Dsdt.aml in root of your HPFS mac
5. Boot...

Alternate 2
1. with all cpu and acpi off goto mac
2. boot quite long...
3. copy dsdt.aml from your usb / windows partition to hpfs root partition.
reboot..

HOW TO PATCH DSDT ?
1. Download the Bios
2. Download the DSDT Patcher Bios 0.5beta
3. Mute and Local0 Fix on, default fix on [3 checked like HPET, and other two.]
4. For vga add on, make sure pci 1 , PEG on, put nvidia or ati as you new add on.
5. Pick first tab to create Bios with AML checked..
6. then you have the DSDT.AML

INSTALL Ethernet and HD Audio output
install kext voodoohda.kext and EthernetL2.kext by drag into kexthelper. add the password, click easy install, reboot

Attached File(s)

 091015S10100_G31T_M7.zip ( 705.4K ) Number of downloads: 0
 kext.zip ( 119.99K ) Number of downloads: 0

 

[Babiloe]

Already detected as double CORE!!!!
Finally,,,Working

[sonia espinoza]

hi, i'am installing mac osx86 in 5 computer with motherboard G31T-M7, but without success.

i need your link http://www.4shared.com/file/85191029/e53dbaf0/dsdt.html but is disable

only one computer is success but the time but is approximately 5 minutes


can you help?

[Babiloe]

hi, i'am installing mac osx86 in 5 computer with motherboard G31T-M7, but without success.

i need your link http://www.4shared.com/file/85191029/e53dbaf0/dsdt.html but is disable

only one computer is success but the time but is approximately 5 minutes


can you help?

DEAR sonia...
It has updated today..
Where you stuck in?
The long boot it was caused by DSDT on VGA.
I think you must buy the cheapest VGA Nvidia like 7300SE and use my nVidia DSDT.aml