ideneb 10.5.5 intel HD audio - Conexant Cx20561 @ Intel 82801IB ICH9, [solved] Conexant High Definition SmartAudio 221 Options

[yuanshijie]

i notice that when i boot up there is no sound on internal speaker until i plug and unplug the headphone !

HOW to solve this problem ??

[Podkovka]

i notice that when i boot up there is no sound on internal speaker until i plug and unplug the headphone !

HOW to solve this problem ??

Has noticed this bug as it seems to me, this problem arises because of an inexact PIN-card if to remove the keys which are responsible for linear exits - a bug vanishes.
Take advantage here of it.  AppleHDA.HDAEnabler.Cx20561.zip ( 323.65K ) Number of downloads: 892
(Work - a digital output, the built in loudspeakers, the ear-phones (auto detection), the built in microphone. Does not work - a connected microphone, at inclusion of a digital input there is an error with auto detection of ear-phones - the built in loudspeakers.)
The main thing - I cannot achieve working capacity of a connected microphone!
Work proceeds

[Joel Beltran]

Has noticed this bug as it seems to me, this problem arises because of an inexact PIN-card if to remove the keys which are responsible for linear exits - a bug vanishes.
Take advantage here of it.  AppleHDA.HDAEnabler.Cx20561.zip ( 323.65K ) Number of downloads: 892
(Work - a digital output, the built in loudspeakers, the ear-phones (auto detection), the built in microphone. Does not work - a connected microphone, at inclusion of a digital input there is an error with auto detection of ear-phones - the built in loudspeakers.)
The main thing - I cannot achieve working capacity of a connected microphone!
Work proceeds

ok, first or all......DAMMMMMM nice work!! i installed the first kexts and i got this


i was having this same problem so install those new kext and now i dont have the line in!! it only show internal mic, by the way its my external mic and its working...

i really need the line in! because i work on garageband can you fix it?

[yuanshijie]

another problem is when i plug the headphone and shutdown the mac , it doesn't cut the power off !

[Podkovka]

i really need the line in! because i work on garageband can you fix it?

The device has added, but it is displayed in the tab "Input" as "Linear exit". Working capacity of the device I can not check up. I ask to inform.
 AppleHDA.kext.zip ( 314.51K ) Number of downloads: 508

another problem is when i plug the headphone and shutdown the mac , it doesn't cut the power off !

Such problem, but only with the switched off power adapter is noticed, i.e. at a food from the battery. It is not critical yet, I will be engaged in the decision after full start of a sound.

[riws]

The device has added, but it is displayed in the tab "Input" as "Linear exit". Working capacity of the device I can not check up. I ask to inform.
 AppleHDA.kext.zip ( 314.51K ) Number of downloads: 508

Such problem, but only with the switched off power adapter is noticed, i.e. at a food from the battery. It is not critical yet, I will be engaged in the decision after full start of a sound.

Just want to say Thnx man for the first working Driver for me, Azalia was for a half Year the only working driver for me, but now InternalSP/Headph/InternalMix/DigitalOut/Autoswitching works.

[Joel Beltran]

woooooooooooooww perfect man, thanks, now the only problem is the shoutdown thing because i use external speakers through the headphones out

excelent work!

[Podkovka]

woooooooooooooww perfect man, thanks, now the only problem is the shoutdown thing because i use external speakers through the headphones out

excelent work!

With last driver the shoutdown problem was gone.
How at you?

[yuanshijie]

With last driver the shoutdown problem was gone.
How at you?

which version ?

[Joel Beltran]

i didnt notice because iwas turning off the ac before shutdown.....yeah! the problem is gone!

thanks its fully working for me!!

[mehdymehdy]

Podkovka hi and thank you for ur work on applehda. i worked on applehda before and all i got the light on my mute turned red and that's all. but now with your applehda it works.

but i have problems. first thing is my Pinconfigurtation numbers look a little bit different than yours here it is.

<01671c30 01671d40 01671e21 01671f01 01771c20 01771d90 01771ea1 01771f01 01871cf0
01871d01 01871e00 01871f40 01971cf0 01971d01 01971e00 01971f40 01a71c10 01a71d01
01a71e17 01a71f92 01b71cf0 01b71d01 01b71e00 01b71f40 01c71cf0 01c71d01 01c71e00
01c71f40 01d71cf0 01d71d01 01d71e00 01d71f40>

second is, i get sound and the headphone works . and the internal and external microphone are recognized but the microphones don't work properly .when i record sound they record a beep sound only . like they don't pick up any sound only beep.

third is my mute don't work.


this is what i did. i put my pinconfiguration numbers inside applehdacontroller but my mic didn't work and the mute didn't work . and my mic is not recognized as external microphone and internal built in microphone anymore it's recognized as LineOut both of them.

i tried to play with the layout and pathmap .but i wasn't successful. because i don't know where you got the numbers inside the layout-filter 0 1 2 3 4 5 6 7 8 9 . like for example where did u get the numbers for gain or frequancy or Q. could u please post ur codec or let me know how to change those numbers or where and how to find them from my codec.

sorry for the long letter . but if u can help me with this it will be great thank you for ur work again.

here is my codec dump from linux

and my codec dump converted all hex to dec.

Attached File(s)

 _dump_.txt ( 4.98K ) Number of downloads: 37
 ConvertedDumpfile.txt ( 4.71K ) Number of downloads: 33

 

[Podkovka]

Unfortunately, but having replaced the laptop, I cannot continue work on a sound. I did not manage to solve a problem of simultaneous work of the built in microphone and external. I spread last version in which the built in microphone does not work, but the external works. Probably who that can finish work.
Only ExtMiс  AppleHDA.kext.ExtMic.zip ( 501.8K ) Number of downloads: 259

Only IntMiс  AppleHDA.kextIntMic.zip ( 314.51K ) Number of downloads: 344

Successes!

[mehdymehdy]

Unfortunately, but having replaced the laptop, I cannot continue work on a sound. I did not manage to solve a problem of simultaneous work of the built in microphone and external. I spread last version in which the built in microphone does not work, but the external works. Probably who that can finish work.
Only ExtMiс  AppleHDA.kext.ExtMic.zip ( 501.8K ) Number of downloads: 259

Only IntMiс  AppleHDA.kextIntMic.zip ( 314.51K ) Number of downloads: 344

Successes!

thanks Podkovka , the applehdaintermic.kext made my internal mic work. but my question was about the filters inside extmic and mic . what do they repersent . and where did u get the data for these filters from. how do u get them from pinconfig or from vista. or they are just inside source layouts and ur trying them out.

and why do u think mute is not working . and was mute working for u?

i don't really know know much . but now i think it's how u set the pathmap . if the pathmap is set right than more devices and more things will work. thank you again.

[jalavoui]

here's a pinconfig from a hp 6700 with a amd processor - they all look similiar

Vendor Id: 0x14f15051
Subsystem Id: 0x103c30cf

01671C30 01671D10 01671E21 01671F02
01771C20 01771D90 01771EA1 01771F02
01871CF0 01871D01 01871E00 01871F40
01971CF0 01971D01 01971E00 01971F40
01A71C10 01A71D01 01A71E17 01A71F95
01B71CF0 01B71D01 01B71E00 01B71F40
01C71CF0 01C71D11 01C71E45 01C71F22
01D71CF0 01D71D01 01D71E00 01D71F40

notice the 3rd column - the last 00 means that the Default Device / Connection Type is undefined
this means unless this is fixed mac os will fail to detect the correct devices
this can be ignored if the info.plist for the AppleHDAController is correct

i'd like to start porting this device using AppleHDA version 1.5.7 (mac os 10.5.5) based on Podkovka changes.
anyone to help?

[mehdymehdy]

yes jalavoui i removed the pinconfig from applehdacontroller.kext info.plist . and it had no affect to the speakers and headphone or internal mic . they all work fine without pingconfig.

so as u say it doesn't matter if the info.plist is correct inside applehda.kext.

but i'd like to report something strange. my built In Mic works properly but i have no external mic device detected . that is because i'm using padkovka's applehda.kext internal mic, and he has the external mic removed from the pathmap.

but the strange thing when i plugin External Mic it does mute the Internal Mic but it doesn't work. and i tried to plugin the headphone inside the External Mic jack. and it worked. i recorded sound and it worked.

So External Mic works If i plug headphone in External Mic jack, it works perfect . but the device stays as internal Mic it doesn't change to external Mic like it does with Internal speakers changing to headphone when headphone is plugged in.

Note: this strange thing happened even when i put my pinconfigs . pingconfigs don't do anything.

lastely mute does't work and i tried changing manythings , but it didn't work.

[Podkovka]

yes jalavoui i removed the pinconfig from applehdacontroller.kext info.plist . and it had no affect to the speakers and headphone or internal mic . they all work fine without pingconfig.

so as u say it doesn't matter if the info.plist is correct inside applehda.kext.

but i'd like to report something strange. my built In Mic works properly but i have no external mic device detected . that is because i'm using padkovka's applehda.kext internal mic, and he has the external mic removed from the pathmap.

but the strange thing when i plugin External Mic it does mute the Internal Mic but it doesn't work. and i tried to plugin the headphone inside the External Mic jack. and it worked. i recorded sound and it worked.

So External Mic works If i plug headphone in External Mic jack, it works perfect . but the device stays as internal Mic it doesn't change to external Mic like it does with Internal speakers changing to headphone when headphone is plugged in.

Note: this strange thing happened even when i put my pinconfigs . pingconfigs don't do anything.

lastely mute does't work and i tried changing manythings , but it didn't work.

PinGonfig, added in AppleHDAController, influences only information display in properties of system.
A problem in that, as the built in microphone and external work on one NodeID, built in - 20, 29 and external 20, 23. I where could not find switching system in this case. It seems to me that additional keys (for example VREF or others) should be used.
As at me already is not present Toshiba the laptop, I cannot continue work.
On other laptop at me different NodeID on the built in microphone and external, but connection auto detection does not work, I switch manually. In Your case it is necessary to try to force to work devices simultaneously.

[kimaca]

I have installed your kext, and it works for me. But I have a problem with Power off when in "shudown" the Laptop. No Power off. Its only if I install this AppleHDA.kext

[Podkovka]

I have installed your kext, and it works for me. But I have a problem with Power off when in "shudown" the Laptop. No Power off. Its only if I install this AppleHDA.kext

Try to remove caches, repair permissions, correct access rights and reboot -v -f

[jalavoui]

Podkovka

can you explain how did you patch AppleHDA.kext

i'm trying to patch (find the right codec) in 10.5.5 and it doesn't seem to work

thanks

[mehdymehdy]

ya i did a lot of attempts to get the external mic work correct but still when i put headphone in mic jack it works as a mic but when i put mic inside exter mic jack it doesn't work. and i tried many things to get mute working . i did not succeed.

i used 3 different applhda.kext . i used the one they use for IDT and i used the one for ALC . and i used different layout settings . and these layouts setting look different in each applehda . so i used different layouts and they all work as long as the pathmap is correct.

i don't know what else i can use inside pathmap for me to get a different result .

i put the node numbers togather 20 23 and 29 at the end . and the ext mic work . but still same behavior. some help wiuld be appreciated thanks.