Samsung NC10 UK revision, Updates / Installation / Modding etc, stuff will be here Options

[G4-Flo]

well you are spot on there - im on a german NC10, bought it in berlin, but i am setting it up completely in english

im gonna try going into safe mode, will post results. how do i do that again? thanks for the quick and informative reply!

EDIT

booted into safe mode with -s, made the fix detailed here http://osx86.wikidot.com/known-issues
looks to have solved it! thanks!

Well guy,

I'm from germany and I had the same problem, too. The only fix was the same way you've solved the problem:

/sbin/mount -uw /
passwd root <- Type any password you want
touch /var/db/.AppleSetupDone
reboot

Well, I don't know why this is happening almost only on german NC10's but as I found out, there are some more differences between the english and the german installations.
You will find out that if you've installed a complete german language package, you won't be able to start the keyboard prefpane. Also you can't change the task-bar into translucent-mode if you're working on a german leopard. Only after you've changed the language into e.g. english, you will be able to change these settings.
The tanslucent-issue occures on real macs, too - that's a stupid issue of leopard and I don't know why this is fixed as we are already on version 10.5.5. That shows that even apple is not perfect :-)

Well, all I can say now is keep on going. Because of Mysticus, leopard is running more than extremely fine on the NC10. And if there working more guys like him on this project, it's getting better and better every single day.

[srcshelton]

Ive restarted now and am trying to complete the setup assistant, but it keeps looping!

This is a known issue, and occurs if the Mac OS Setup Assistant can't find any network interface... as will be the case on a stock NC10, as neither the integrated LAN nor the MiniPCIe wireless LAN chipsets are supported.

You can skip the setup assistant from the Terminal of the install DVD, but that does leave the system in a non-fully configured state.

The best solution is probably to give MacOS a network interface it can see - either swap-out the default Wifi card for a Dell Truemobile card (avoid the 802.11n ones - these aren't yet well supported) or use a supported USB ethernet adapter (such as Apple sells for the MacBook Air). It doesn't have to be connected to a network, only present. In either of these cases, setup will then proceed as expected and properly configure the user and root accounts.

[ Mysticus C*]

No News

currently stuck at the moment... i managed to make system show the devices, but headphone doesnt work still, and external mic somewhat working, it responds but amplifying is very weak, and there is some sort of parasite in the noise... not too clear...

so i dont know what i m overlooking or anything done wrong...

and none seems to be helping...

and those guys who made those patching topic and get their sound work because of using built in codecs in the driver (what it means is that those guys are already using supported codecs by the driver, so obviously their codecs are working...) and when asked question, none of them answering, this is the most annoying part, they either dont know really what they are doing (because they got all the hints and kinks from other resources...) or they just simply ignoring to answer questions... anyways...

hopefully we will get past this as well...

if anyone joined the msiwind forums, ask them to come to this topic and maybe we can join forces with some more knowledgeable guys...

else it seems a bit unfortunate for me to finish it all by myself at the moment...

[cmascatello]

The 1505 Dell WiFi card works well and is supported natively by OSX. I have used this mini PCI-E card in 3 netbooks with OSX486 and there have been no issues. The 1510 is a half-height card and does not work as nicely with the NC10 b/c there is no screwdown available.

[jimmytrento]

Hi Myst, Hi all.

I posted an Help request on MSI forum.

Hope someone'll reply

Anyway, keep on try harder !!!!

j.

[Dust Mason]

Just wanted to make a follow-up post here with a little list of tips which helped me get everything installed. I'm now triple-booting Ubuntu 8.10, Mac OX 10.5.5, and WinXP using a combination of GRUB and the Darwin bootloader, thanks to Mysticus' great driver packs and guide.

• Whilst partitioning my drive with gparted in linux i hosed my windows install, so to get it installed again i used multiboot_10.cmd, which i can highly recommend for other NC10 users to create a USB stick version of the Samsung Windows recovery disc. Find it here http://www.msfn.org/board/How-to-install-X...6.html&st=6 . Just remember that if you are creating it on a Vista machine, as I did, you need to turn off UAC (User Account Control) to get it to work!
• When I used ddmac to copy the JaS/Mysticus ISO to the FAT32 partition I had created to function as my "install" partition, I was getting a "chain booting error" from CHAIN0 or alternatively a "HFS partition not found" error from the tboot loader. To fix this i used the fdisk utility from my Ubuntu Live USB stick - I simply needed to change the ID of the partition to "af" - then the install continued normally. I'd like to note that this worked with my drive partitioned as follows:
  
  1. WinXP, NTFS, primary
  2. extended, with:
  • linux swap, ext2
  • linux main, ext3
  3. MacOS install, hfs+, primary
  4. MacOS main, hfs+, primary
  
• As mentioned by the posters above, I had to boot into single mode to apply the fix to skip the looping setup assistant. I am on a German NC10 and this seems to be a common problem with them.
• For my multiboot setup, GRUB is installed to the main linux partition. Upon boot, I can choose either "Ubuntu" or "Windows/Mac OS". If I choose the latter, the Windows boot.ini kicks in, and I can choose either "Windows" or "Mac OS". If I choose Mac OS, the Darwin bootloader comes up and from there I can choose my main Mac partition. 3 separate menus is not ideal, I know, but its OK for me.

Big thanks to Mysticus again. So glad to see it finally running

[Navaira]

I seem to have a problem nobody else reported yet

I did the following:
* replaced the network card with Dell 1490
* patched the DVD into 10.5.4 using ppf
* deleted the D: drive partition as originally installed
* created a 75 GB partition and named it OS X
* made a 4.7 GB secondary partition, put a logical drive on it and named it install
* used ddmac to put the iso on the logical drive
* installed Mac OS X
(I have the ddmac menu that displays a choice of Windows and Mac OS; the only added bit is that when I select Mac OS I need to hit F8 and choose the OS X drive. This is barely any hassle so once sleep works I probably won't be arsed to repair that :$)
* ran 10.5.5 combo update
* ran the Stage 3 update plus drivers as listed on Bike Town
* aaaand... everything works perfect (Mysticus C* you are brilliant) except for one tiny thing... when I put the computer to sleep using Fn+Esc or the shutdown/restart/sleep menu it falls asleep immediately, but never wakes up again -- when I press the power button again, the wireless diode comes back to life, hdd diode lights up for a sec then goes out, and that's it. The screen remains black and there is no more activity until I restart the thing...

I tried reinstalling about 10 times, managed to get more interesting problems but never solved the sleep issue. I disabled hyperthreading in BIOS, didn't bother with the drives as I wasn't using USB DVD...

Any hints? My NC10 was bought in the Netherlands, I installed OS X in English though. Thanks in advance for any help!

[ Mysticus C*]

navaira: check your bios setting as explained in the pdf guide page 54 and also check your acpi setting to make sure it is s3 sleep mode...

[Navaira]

Mysticus C*:

1) from the pdf I understood there were two settings to be changed -- the startup/usb drive and hyperthreading; have I missed something? Is there anything else to change?
2) how do I check the acpi setting? I checked all options in the BIOS but can't see anything like that, also System Preferences doesn't have it; google didn't help either...

PS. Thank you very much for helping... I am amazed at your patience and the amount of work you put into this -- how do you find time?!
PS2. Just made a tiny lil' donation

[ Mysticus C*]

Mysticus C*:

1) from the pdf I understood there were two settings to be changed -- the startup/usb drive and hyperthreading; have I missed something? Is there anything else to change?
2) how do I check the acpi setting? I checked all options in the BIOS but can't see anything like that, also System Preferences doesn't have it; google didn't help either...

PS. Thank you very much for helping... I am amazed at your patience and the amount of work you put into this -- how do you find time?!
PS2. Just made a tiny lil' donation

acpi option is not shown so it means it is already set to s3 by default

check for these settings in bios under advanced title:

hyperthreading: Enabled
processor power management: Enabled
legacy usb: Enabled
large disk access mode: DOS

EDB: Enabled (this is one of the most important one)
Internal LAN: Enabled
Touchpad: Enabled
CPU Power Saving: Enabled

Can you confirm all the settings are set as shown above?

Thanx for the PS2

[Navaira]

OH MY DOG -- the EDB setting has helped!!!!!!!

*switches the MacNC10 into sleep and back again a few times*

thankyouthankyouthankyouthankyou -- this is worth so much more than my PS2

[ Mysticus C*]

OH MY DOG -- the EDB setting has helped!!!!!!!

*switches the MacNC10 into sleep and back again a few times*

thankyouthankyouthankyouthankyou -- this is worth so much more than my PS2

bear in mind that
sleep currently work in battery mode, if power adapter is attached, sleep works for one sec, usb ports cause wake event... ok? this is a pm issue... we need to find out...

also, read my updgrade dvd guide, so that you can upgrade your current dvd iso to 10.5.5 as well... that means u wont need to update it if you were to install it again...

[Navaira]

Oh, I don't mind that. I tend to either be using the laptop and then have it plugged or to put it to sleep and then not have it plugged...

I am though quite curious what will happen if I put it to sleep and then connect the power source -- must investigate that. But only out of sheer curiosity -- as far as I am concerned NC10 has just replaced my very old ibook g4 by working exactly like the g4, only faster

[ Mysticus C*]

Oh, I don't mind that. I tend to either be using the laptop and then have it plugged or to put it to sleep and then not have it plugged...

I am though quite curious what will happen if I put it to sleep and then connect the power source -- must investigate that. But only out of sheer curiosity -- as far as I am concerned NC10 has just replaced my very old ibook g4 by working exactly like the g4, only faster

cool than

adapter will wake the system...

[Navaira]

Just checked, indeed. That looks quite funny actually...

[fattony897]

hi all, when will a guide be out for installing from hhd? thanks.

[Orange Mac]

I've been running the MSIwindOSX86.iso for several weeks on my NC10 with only a few annoyances. I've read through this entire thread, have downloaded all of the installation support files (just waiting for the JAS ISO to complete). In preparation for installation I have a few questions that I hope you can help me with.

Current config: US NC-10 (white), 2GB, Dell 1500, bluetooth mouse
Disk config: disk0s1=Samsung recovery (6GB FAT), disk0s2=XP (60GB NTFS), disk0s3=OS X (83GB). External DVD, external drive for Time Machine and media/movie storage

Annoyances: USB only available if USB was in use at boot, bluetooth mouse connects but cannot pair, Option and Cmd key mapping, headphone audio (would be nice to have for in-flight entertainment), external display support mirror or dual (would be nice to have)

Q1: will the solution discussed in this thread address all of the annoyances listed above (except the nice-to-haves)?

Q2: for partition cloning, would an external drive suffice?
I'm currently using Time Machine to one external drive.
I currently run OS X almost exclusively, including corporate VPN, etc.
It'd be nice to keep my current OS X partition size.
I could go to 2x40GB partitions if needed.

Thanks for your efforts... I look forward to having a cleaner, sleeker, OS X install.

[SWE-gargamel]

Annoyances: USB only available if USB was in use at boot, bluetooth mouse connects but cannot pair, Option and Cmd key mapping, headphone audio (would be nice to have for in-flight entertainment), external display support mirror or dual (would be nice to have)

Q1: will the solution discussed in this thread address all of the annoyances listed above (except the nice-to-haves)?

USB only available if USB was in use at boot [WORKS]
bluetooth mouse connects but cannot pair [DON'T KNOW]
Option and Cmd key mapping [WORKS WITH A FIX(?)]
headphone audio (would be nice to have for in-flight entertainment) [DON'T WORK]
external display support mirror or dual (would be nice to have) [WORKS]

[RealRooster]

I have been playing around with the screen brightness and I have some info to share.
With the modified kext files I'm now able to change screen brightness with terminal commands; meaning that we don't have to use ScreenShade or any similar software to dim our screens anymore.

Something I would like to know and hope that someone here could give me an answer is that where we define Fn + key button mapping. Like for volume adjustment the key mapping (Fn+ left/right arrow) is already working, where this is defined? Idea is that screen brightness could be changed by pressing Fn + Up/Down arrow.

[ Mysticus C*]

fattony:
sorry i didnt have time to do it lately working on audio and other things... it is not hard to do it either, there have been links posted couple of times... but i will update guide soon, as soon as i finish other kinks... (audio if possible, vanilla pm bundle is working so i will just add the solution to next package, dsdt implementation which will be necessary for upcoming 10.5.6 update--which also requires either chamelon bootloader installation or netkas efi v9, but i need to make it as noob friendly as possible otherwise it will be diffucult to manage by newbies/noobs)--> once all does done, i will wrap it up mate, also delaying it for 10.5.6 purposes, because i m planning on making a 10.5.6 upgrade dvd package as well so everything will be done at once, else, i will have to keep modifying adding different things which makes it hard to follow later, and will confuse some newbies...

orange mac:
usb will work just fine no worries about it
bluetooth issue is something out of my scope since i dont have any bluetooth mouse/kb to test to see what is going on... if you are planning on sending me one you re welcome to do, so i can tell u
bluetooth audio pairing would require bluetooth audio transmitter or bluetooth sound card...
you can keep your current partition size, but you can also split the osx partition into two pieces one should be 4.4 gb (for ddmac hdd installation of iso --i dont have the guide made for it yet, but there are links posted before you can read through)

I have been playing around with the screen brightness and I have some info to share.
With the modified kext files I'm now able to change screen brightness with terminal commands; meaning that we don't have to use ScreenShade or any similar software to dim our screens anymore.

Something I would like to know and hope that someone here could give me an answer is that where we define Fn + key button mapping. Like for volume adjustment the key mapping (Fn+ left/right arrow) is already working, where this is defined? Idea is that screen brightness could be changed by pressing Fn + Up/Down arrow.

if it can work with terminal, it is possible to make scripts and assigning shortcut keys for it, but i need to search a bit for keymapping for those function keys, it may be easy or difficult depending on which file or program they are defined inside...