Samsung NC10 UK revision, Updates / Installation / Modding etc, stuff will be here Options

[lolof]

Just for information, I come back to my wake up problem under 10.5.7.
I tryed with another boot loader and it is always the same... May be an extention...

[ Mysticus C*]

Just for information, I come back to my wake up problem under 10.5.7.
I tryed with another boot loader and it is always the same... May be an extention...

i just tested my 10.5.7 partition, and sleep works fine on my nc10...

i suggest you to first change back to original bootloader (download boot.pkg from nc10 files section, and install it on your boot partition)
then try, if it works, it is bootloader, else, either you are using a dsdt patch, or different bios? or some driver you installed is causing the issue!

also, you have mysticus.iso installed? or efi method?

[lolof]

I changed back with original bootloader but wake up still not work.
Yes; I have mysticus.iso installed.
What is dsdt patch ?
Also, I just updated my nc10 with an original samsung internal umts modul, I do not know if it can cause the problem.
Bios version 04CA

[ Mysticus C*]

I changed back with original bootloader but wake up still not work.
Yes; I have mysticus.iso installed.
What is dsdt patch ?
Also, I just updated my nc10 with an original samsung internal umts modul, I do not know if it can cause the problem.
Bios version 04CA

mine is still at 02ca...

so it could be a bios issue, but cant say for sure... did you start from 10.5.6 mysticus iso? or from previous ones, you updated? starting with 10.5.4? 10.5.5 ?

i will update bios on my machine as well to see the effects... someone mentioned before that updating bios to latest version, allowed him to control brightness manualy, if set to manual from bios... (this means we may not need QS after all, if what he said is true)


Also TO Donators:

G.S.
F.S.
J.V.
C.B.P.
F.A-E. (thanx very very much )

thanx guys...

To All Others:
New Domain will be ready in 1-2 days, as domain regs takes around 48hrs... hosting will be followed...

THIS WILL BE OUR NEW HOME

[lolof]

I start from 10.5.6 mysticus.iso and update to 10.5.7
I only add voodoohda, voodoops2controller, voodoopower. I remove voodoohda and voodoopower but it didnt change anything.
I do not know what to try...

Still need qs to set brighness on 04CA even if set manually in bios. Under ubuntu 9.0.4 brightness adjustement works perfectly as it should... So, if it work on ubuntu, I assume that would be also possible on osx...

[ Mysticus C*]

I start from 10.5.6 mysticus.iso and update to 10.5.7
I only add voodoohda, voodoops2controller, voodoopower. I remove voodoohda and voodoopower but it didnt change anything.
I do not know what to try...

i suspect that voodoopower is still around your system... or by installing voodoopower, you broke the original powermanagement! therefore it explains your problems!

what else did you install? but fail to mention?

people fail to mention what they do, it misleads us who ever try to help...

[lolof]

It is all I remember..... I will delete voodopower and try to find the original powermanagment and reinstall it hoping it will work. If not, I will probably have to do a fresch install :-(

I've also update my bios to 07CAD0 but I cannot see anychange in my mac osx. Nativ brightness keys still doesnt work.

I read somewhere that "with the effi" method, dsdt file is different if you have a nc10 with hsdpa or not. I have one with hsdpa. Could it be the problem? Is this also important with the mysticus.iso install cd ??

@Mysticus or someone else,

Could you please upload somewhere your extention folder. As last try before doing a fresh install, I would like to replace my extentions by a fully working set of extention. Normally it should work like this!
Thanks

[Majestus]

Already donated my little portion! I just wish that there were links to the Desktop files. I can't wait to get this system up and running without the stupid nvidia screen freezes. Can't wait. What's the name of the new site? Mystiquemac?

PS: Mysticus, I just realized that your nick and mine have the same amount of letters and are essentially similar....kinda, sorta but not really, whatever lol.

[teateam]

try remove AppleLPC.kext

[ Mysticus C*]

@EVERYONE ELSE: REMINDER
currently our forum is down with major tech and beyond issues

to avoid situations like this, i ve decided to own our own domain/hosting, in order to provide better, reliable, faster support. unfortunately, domains and hosting cost money periodicaly... For this I need your donation support in order to raise cash to set up our own domain/hosting ...!

You can use this button for the moment for donations

thanx for understanding guys... this is an urgent issue and sorry for the inconvenience beyond my control in this current situation...

Thanx to current donators: G.S., F.S., J.V.,C.B.P.,S.L.

[lolof]

I removed AppleLPC.kext, I thought all was ok because sleep/wake up worked 2 times. After the 2 "good times", the problem came back to the start point.....
I read about dstd, could be this the problem on a samsung hsdpa with mysticus.iso ??

[srcshelton]

currently our forum is down with major tech and beyond issues

Are you able to let us know any details of these tech issues?

Is the content itself retrievable, or has all of the hard work and advice which went into the forum been lost?

[ Mysticus C*]

Are you able to let us know any details of these tech issues?

Is the content itself retrievable, or has all of the hard work and advice which went into the forum been lost?

the hosting co gone bust or something worse happened, therefore no information as of yet...

at worst case scenerio, we will loose a week worth stuff... but not all, i kept on getting backup of the entire database... i m waiting for main owner to provide me the latest back up of the server, therefore i can grab the last backup... else, i will just put back what we got about a week or so ago...

our new domain is ready, hosting is ready, i m just waiting for the backup files, then i will put it online... i will provide more information once we start through the process this will be better in many ways...

i will pm you the details, you may like it

[planetzeos]

awsome

the hosting co gone bust or something worse happened, therefore no information as of yet...

at worst case scenerio, we will loose a week worth stuff... but not all, i kept on getting backup of the entire database... i m waiting for main owner to provide me the latest back up of the server, therefore i can grab the last backup... else, i will just put back what we got about a week or so ago...

our new domain is ready, hosting is ready, i m just waiting for the backup files, then i will put it online... i will provide more information once we start through the process this will be better in many ways...

i will pm you the details, you may like it

[ Mysticus C*]

Thanx to these people for their support:
======================
G.S.
F.S.
J.V.
C.B.P.
F.A-E. (thanx very very much )
K.B.
E.B
======================
New Domain is ready, Hosting is ready, I m just waiting for backup files from the nite of the incident... once done, it should be all good to go...
Coming Soon

[lolof]

Always with my sleep/wake up problem!!!!

I have clonned my system and have restore it on a friend nc10 (without umts,hsdpa modul), the slep/wake up works very good.

It means that there is somewhere a difference between nc10 with and without hsdpa modul.(mysticus.iso 10.5.6 followed by 10.5.7 update)
With nc10 umts, it is almost impossible to wake up the computer after a sleep.
What could be the fix for this? dstd ??
Advices are welcome

[ Mysticus C*]

your claim is a bit too much, we need more confirmation from other nc10 owners with 3g modem models.... if they all have the same sleep/wake issue, your comment would be valid...

are you sure it just started after installing 10.5.7 update?

and are you sure you didnt damage anything in the powermanagement drivers? or installed different things?

[lolof]

your claim is a bit too much, we need more confirmation from other nc10 owners with 3g modem models.... if they all have the same sleep/wake issue, your comment would be valid...

are you sure it just started after installing 10.5.7 update?

and are you sure you didnt damage anything in the powermanagement drivers? or installed different things?

I am not sure if it comes from 10.5.7 because I changed to umts model and update to 10.5.7 at the same time....

I am sure I didnt damage the powermanagement or installed other things becasue as I said, I clonned my hard drive in another nc10 without 3G and all worked perfectly. Exactly the same system (clonned with the apple disk utility) but on different hardware, at least different because of internal 3G modul.

Please could owner from nc10 3G (with install mysticus.iso updated to 10.5.7) control and confirm if the sleep, wake up (fn + esc) works ???

Later evening, if I have no other nc10 3G users confirmation, I will open my nc10, disconnect the 3G modul and see if there is difference...

Thanks in advance.

[teateam]

2lolof
Your modems connect to PC via USB (internal miniPCIex have usb line, check in IORegistryExplorer)?
Try install VoodooUSBEHCI (read manual before). I have intrenal WiMax module, and sleep work ok, but i use reatil install and DSDT patches...

P.S. Share your ioreg.

[srcshelton]

It means that there is somewhere a difference between nc10 with and without hsdpa modul.(mysticus.iso 10.5.6 followed by 10.5.7 update)
With nc10 umts, it is almost impossible to wake up the computer after a sleep.
What could be the fix for this? dstd ??

There is a difference between the DSD tables of non-3G NC10s and 3G NC10s - so if you're using a stock DSDT.aml then this will likely be incorrect.

Having said this, I have no idea whether this would have any effect, or even be corrected by the OS... or whether it might be the source of the sleep problems.

Of course, it could be a misinteraction with the 3G module itself or the internal adapter that it is connected to.

No guarantees, but you could try http://blog.stuart.shelton.me/downloads#3G-DSDT.aml