Modded ALC662 & Sigmatel 9223 with codec verbs, Showing info in System Profiler Options

[konistehrad]

Hey guys: awesome work! Using the kext in #12, I can confirm the front headphone jack works as expected, as do the output jacks in the back. No mic front, no auto-detect, as expected. Attached is a copy of my 662 dump, in case it'll help at all. Thanks again!

Attached File(s)

 alc_662_dump.txt ( 8.13K ) Number of downloads: 107

 

[jWin]

IronFly try this, it contains almost the same thing, but, using your codec verbs edited [attachment=37581:IronFly.zip]

I own the same board, tried the codec posted for Ironfly, shows everything but I hear nothing, same goes for every other version in this thread.

[Plucky81]

Nothing to do in my AsRock AliveNF7G-FullHD R3.0
Glad to see happiness everywhere... but me?!

[OcciJano]

Nothing to do in my AsRock AliveNF7G-FullHD R3.0
Glad to see happiness everywhere... but me?!

Did you removed HDAEnabler.kext, ALCInject.kext? Please check that. If you removed, then I really don't know by now how to fix it.
If System Profiler shows Audio ID: 662 then installation is ok. In that case I hope you have audio. Let me know.

[OcciJano]

Hi Gianluca:

If you got IronFly.zip Post#20 working then ignore this  Gianlucazip.zip ( 811.84K ) Number of downloads: 112

Is almost the same one, I removed the codec verbs so won't have audio info in System Profiler.

[Assa55in]

Works front head phones now if we can just get the internal mic to work I will be set

[Pietruszka]

One more thing...

I need to boot with -f to have working sound...

if not i got message System/Library/Extensions/AppleHDA.kext/Contents/Plugins/HDAEnabler.kext not properly installed...

can you tell me what is wrong.....did chmod chown with AppleHDA.kext.....repaired permissions....

thanks for any help...

hello again

can someone help with this???

[thelightkeeper]

Wonderful, I have Alzalia Realtek ALC662, now working like a champ on my G31-S2L mobo.

FYI, my rigs:
Leopard 10.5.5
Core2Duo E6750 2.66Ghz
Gigabyte G31M S2L (Realtek ALC662 sound)
Nvidia 8800GT 512Mb G92
Seagate IDE 160Gb + WD500Gb SATA2

[OcciJano]

hello again

can someone help with this???

Hi Pietruszka:

Every AppleHDA.kext I've posted here contains a HDAEnabler.kext inside, so you need to remove the one that is inside your /System/Extensions/, also remove ALCInject.kext.

Once removed, if you don't have Kext Helper, drag the AppleHDA.kext inside /System/Extensions/, then in terminal:

chmod -R 755 /Volumes/Tiger/System/Library/Extensions/AppleHDA.kext
chown -R root:wheel /Volumes/Tiger/System/Library/Extensions/AppleHDA.kext
rm /Volumes/Tiger/System/Library/Extensions.mkext
diskutil repairPermissions /Volumes/Tiger/System/Library/Extensions/

Replace Tiger with the actual name of the partition containing your MacOS.

[douche]

I bought an Asrock 4CoreDual-SATA2 mobo with ALC662 audio. The HCL for 10.4.8 on the wiki states http://forum.insanelymac.com/index.php?showtopic=36520&st=0&p=259784&#entry259784"[b] thread has a driver for ALC662, and that "Everything works" with it. Yet, the topic title says it's for ALC88x. And, 3 different drivers are on that page, which one are you supposed to install? Has anyone had luck with this?

[OcciJano]

I bought an Asrock 4CoreDual-SATA2 mobo with ALC662 audio. The HCL for 10.4.8 on the wiki states http://forum.insanelymac.com/index.php?showtopic=36520&st=0&p=259784&#entry259784"[b] thread has a driver for ALC662, and that "Everything works" with it. Yet, the topic title says it's for ALC88x. And, 3 different drivers are on that page, which one are you supposed to install? Has anyone had luck with this?

Well, there is also a modded AppleHDA for Sigmatel 9223, but, ALC662 has been harder to get done, that's the reasons for several attempts to get it right.
Try first the one from Post #12
You can also try from Post #6, Post #25, and Post #1
The thread you refer was a very good one, but, using azalia (ALCInject) only gives sound out.

[douche]

Well, there is also a modded AppleHDA for Sigmatel 9223, but, ALC662 has been harder to get done, that's the reasons for several attempts to get it right.

So, do you think there's an error on the HCL, then?

Try first the one from Post #12
You can also try from Post #6, Post #25, and Post #1

I'd love to, but can you tell me how to remove/uninstall it if it does NOT work?

[OcciJano]

So, do you think there's an error on the HCL, then?
I'd love to, but can you tell me how to remove/uninstall it if it does NOT work?

To remove any of my kexts simply remove the AppleHDA.kext out of your MacOS /System/Library/Extensions/
Then install any other AppleHDA.

Edit 1:

Oh... I didn't pay attention to your first post, yes, there are some ALC88x, you're right, but I haven't tested. Don't know if they work in ALC662

Edit 2:
To remove others ALC662, remove AppleHDA.kext and probably you need to remove also HDAEnabler.kext or ALCInject.kext.

[douche]

To remove any of my kexts simply remove the AppleHDA.kext out of your MacOS /System/Library/Extensions/
Then install any other AppleHDA

Okay. Will do. I'll post back my results, soon.

[douche]

I just tried from post #12. Great Job!! Except Mute does NOT work, neither does my Front Panel. Any way to fix, at least, mute?? Actually, my Front Panel will NOT work in Windows, either, but it works in Knoppix and Linux. Also, System Profiler will NOT show Device or Audio ID.

[PC-Ente]

Hi i allsow installed the package for Ironfly, i have the Same Motherboard... and i can see the devices in OS X Settings but i cant hear anything... front isnt working ass well...

made a dump with Ubuntu 8.04

Attached File(s)

 dump.txt ( 8.15K ) Number of downloads: 32

 

[puremaggot]

Does this has Volume Control?

[atothek]

Thanks. This works great!

[tmongkol]

To OcciJano

I modified your AppleHDA.kext for getting headphone auto switch. Front speakers will be muted, if headphone plugs in the front jack. However, cannot get 4 channels. I made it as another option.

Note: Front audio panel should support HDA.

How I did;

1. change 21471e01 (Line Out) to 21471e11 (Internal speaker)

2. change 21b71d4c to 21b71d40 (Misc = 0; jack detection supported. Got knowledge from reading Microsoft's Pin Configuration Guidelines for High Definition Audio Devices.)

3. edit pathmap, see my posted AppleHDA.kext

4. I use LineIn (freeware) for using my old CD player from Line In port pass through front speakers. http://www.rogueamoeba.com/freebies/

Working: Line Out/Internal Speaker(Green), Line In (Blue), Rear Mic(Pink), Front Headphone (Green), Optical Output; tested on ONKYO S5105
Not Working: Front Mic (Pink)


*** If you want 5.1 analog output, please go to post #50.


Edited on 12/10/2008

Attached File(s)

 AppleHDA662_945GCM_S2L.kext.zip ( 809.79K ) Number of downloads: 311

 

[konistehrad]

I modified your AppleHDA.kext for getting headphone auto switch. Front speakers will be muted, if headphone plugs in the front jack. However, cannot get 4 channels. I made it as another option.

Got auto detection working for me; thanks!!