New ALC861VD ALC268 ALC660/660VD, No kernel panic! |
![]() |
New ALC861VD ALC268 ALC660/660VD, No kernel panic! |
|
bob2600
InsanelyMac Protégé
|
![]() |
Oct 14 2008, 08:12 PM Post #41
|
![]()
|
The ALC862 toshiba kext that madtux posted partially works on my Toshiba A135-s4427.
Speakers and Mic work but the Headphones port is still not working. |
|
来去如风
InsanelyMac Protégé
|
![]() |
Oct 15 2008, 05:35 AM Post #42
|
|
I have tryed the MadTux_ALC861VD_beta_Leo.zip. But the external mic still can't work.In the system Perferences,there is no input devices found>
|
|
Damn.x
InsanelyMac Protégé
|
![]() |
Oct 16 2008, 12:42 AM Post #43
|
|
Can you write a short install guide for ALC268, please? I have Internal Speakers working and I see the automatic switch between Internal Speakers and Headphone but I have no sound on Headphone. Why can I not completely mute the sound? what kext are you using? I used the AppleHDA.kext of the MadTux_ALC268_A.zip from the first post, installed with KextHelper b7. Is there a working kext for the acer aspire one with working auto-switch, internal speakers, headphone and audio-in? Microphone is not so important for me. |
|
collit99
InsanelyMac Geek
|
![]() |
Oct 16 2008, 01:34 AM Post #44
|
![]() ![]()
|
what kext are you using? I used the AppleHDA.kext of the MadTux_ALC268_A.zip from the first post, installed with KextHelper b7. Is there a working kext for the asus aspire one with working auto-switch, internal speakers, headphone and audio-in? Microphone is not so important for me. Try the one on my signature... |
|
markpenn
InsanelyMac Protégé
|
![]() |
Oct 16 2008, 01:56 AM Post #45
|
![]()
|
Hi, New AppleHDA kext with Internal/External MIC, still no mute but I'm working on it. Based on ALC268Installer2. Credit goes to Taruga and Madtux! Auto switching and Shutdown(Without using HDAFIX v3) should work. Works on my Acer Aspire 4310. Still needs HDAEnabler. [attachment=36105:ALC268_w...rnal_Mic.zip] with this ..I have lound sounds/noise the mins the osx is logged in.. ? |
|
Damn.x
InsanelyMac Protégé
|
![]() |
Oct 16 2008, 02:27 AM Post #46
|
|
with this ..I have lound sounds/noise the mins the osx is logged in.. ? It's the noise from the internal mic, I have this too. The only thing (for this moment) you can do is to turn the volume from the internal mic to 0%. Try the one on my signature... Oh sorry, I used the one from MadTux_collit99_ALC268_B.zip. I think it must be the same as in the alc268_january08.zip by Taruga. Tommorow I will try your one. Can I overwrite the existing AppleHDA.kext with Kext Helper or do I have to delete the old first and then install the new? On a new installation of mac os x, is it important to install the ALC268 Installer (1, 2 or 5?) first and after this the AppleHDA.kext or can I directly replace the patched AppleHDA.kext? Do you know a difference between ALC268 Installer 1, 2 or 5? What's with HDAEnabler.kext, is it required anymore? Can you write a very short step-by-step guide for this ALC268 installation, please? |
|
collit99
InsanelyMac Geek
|
![]() |
Oct 16 2008, 04:13 AM Post #47
|
![]() ![]()
|
with this ..I have lound sounds/noise the mins the osx is logged in.. ? This is due to External MIC, go to sound preferences under input device, and lower the volume of the 2nd "Internal Mic" until the white noise is gone. It's the noise from the internal mic, I have this too. The only thing (for this moment) you can do is to turn the volume from the internal mic to 0%. Oh sorry, I used the one from MadTux_collit99_ALC268_B.zip. I think it must be the same as in the alc268_january08.zip by Taruga. Tommorow I will try your one. Can I overwrite the existing AppleHDA.kext with Kext Helper or do I have to delete the old first and then install the new? On a new installation of mac os x, is it important to install the ALC268 Installer (1, 2 or 5?) first and after this the AppleHDA.kext or can I directly replace the patched AppleHDA.kext? Do you know a difference between ALC268 Installer 1, 2 or 5? What's with HDAEnabler.kext, is it required anymore? Can you write a very short step-by-step guide for this ALC268 installation, please? KextHelper do automatic backup of kext that is being replaced. On new OSX just install the attached HDAEnabler and the AppleHDA(in my sig) using KextHelper or OSX86Tools, repair permission using Disk Utility and reboot. You don't need to install any of those ALC268 Installer.
HDAEnabler.kext.zip ( 10.95K )
Number of downloads: 171 |
|
ckybam69
InsanelyMac Protégé
|
![]() |
Oct 16 2008, 08:57 AM Post #48
|
![]()
|
why does the alc861-vd not work on toshiba laptops? is it because of the problem where in linux its alc861-vd and in vista its alc862 on toshiba laptops?
also i tried making a dump from the ubuntu live cd and i only get like 5 lines of text: CODE Codec: Generic 11c1 ID 1040 Address: 0 Vendor Id: 0x11c11040 Subsystem Id: 0x11790001 Revision Id: 0x100200 Modem Function Group: 0x1 i am on toshiba satellite a135-s2266 laptop. i get sound from the speakers and i have volume control but no headphones ore mic. any ideas on what i can do to get this working? |
|
Damn.x
InsanelyMac Protégé
|
![]() |
Oct 16 2008, 10:09 PM Post #49
|
|
On new OSX just install the attached HDAEnabler and the AppleHDA(in my sig) using KextHelper or OSX86Tools, repair permission using Disk Utility and reboot. You don't need to install any of those ALC268 Installer. Great work! This works very good on aspire one but I found 2 errors: 1. I can't turn the volume of audio-in down. That means, I have the input volume set to 0% but it plays the input signal with the same volume and quality as the input source. When I push the volume slider only a bit from left (0%) to right (100%) the sound will get louder, has a noise on it and it distort the audio quality. The noise appears also when there is no input source connected. I think when the input volume is set to 0%, the input signal is 100% and when the input volume is set to 100%, it's 200% or more of the input signal. 2. The audio-in signal runs on internal mic, not on internal speakers. I mean that's the reason why the mic will not work correctly. If I'm wrong with the second point, for what are the internal speakers on input? Can you fix this, please? It would be very great to have an almost full working ALC268 driver. |
|
the light guy
InsanelyMac Protégé
|
![]() |
Oct 17 2008, 04:32 AM Post #50
|
|
On a Lenovo 3000 N100 Model 0768-E5U funning Leo4all 10.5.2, only MTux_ALC861VD_Leo.zip works. The beta supports input but not output.
The chipset in question is identified by Lenovo as an ALC862 although that may just be a different naming convention. Let me know if you want any dumps - I'm quad-booting Ubuntu 8, OSX 10.5.2, Vista x86 and FreeBSD 7 - so I can give you pretty much anything. |
|
Eddie94
iDeneb Team Member
|
![]() |
Oct 17 2008, 01:06 PM Post #51
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
MadTux please help all the people with a toshiba and the alc861vd!
thanks! |
|
MadTux
InsanelyMac Geek
|
![]() |
Oct 17 2008, 01:55 PM Post #52
|
![]() ![]()
|
The ALC862 toshiba kext that madtux posted partially works on my Toshiba A135-s4427. Speakers and Mic work but the Headphones port is still not working. I posted a toshiba on first page, U may try that one, Headphones are diff in setup on toshiba than on Lenovo C200 I am using. On a Lenovo 3000 N100 Model 0768-E5U funning Leo4all 10.5.2, only MTux_ALC861VD_Leo.zip works. The beta supports input but not output. The chipset in question is identified by Lenovo as an ALC862 although that may just be a different naming convention. Let me know if you want any dumps - I'm quad-booting Ubuntu 8, OSX 10.5.2, Vista x86 and FreeBSD 7 - so I can give you pretty much anything. Have any dump, please post as text file. |
|
Eddie94
iDeneb Team Member
|
![]() |
Oct 17 2008, 02:22 PM Post #53
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
The kext for toshiba don't work in a Toshiba Satellite L30-105, don't load the kext, if i load this in terminal, no sound
Thanks MadTux for your help! |
|
schnogg
InsanelyMac Protégé
|
![]() |
Oct 17 2008, 05:01 PM Post #54
|
|
Working on getting sound to functioning completely on my Toshiba Satellite M115-S3094 laptop. I believe it has ALC861VD. Azalia works to get sound out, no Inputs listed. MTux_ALC861VD_Toshiba.zip worked for the same result, no inputs. MadTux_ALC861VD_beta_Leo.zip Worked for output, listed inputs, but both mic input and mic didn't work. MTux_ALC861VD_Leo.zip is the same result as beta Leo.
If someone has this laptop and has the inputs working, I'd like to hear about it. |
|
Gxmk
InsanelyMac Protégé
|
![]() |
Oct 18 2008, 10:00 AM Post #55
|
|
ALC268_B works for Acer Aspire 4710Z! Thanks alot MadTux!
|
|
eken
InsanelyMac Protégé
|
![]() |
Oct 18 2008, 11:12 AM Post #56
|
|
My toshiba laptop with iDeneb 10.5.5 installed ALC861 not work, no sound.
Attached File(s)
|
|
MadTux
InsanelyMac Geek
|
![]() |
Oct 18 2008, 12:03 PM Post #57
|
![]() ![]()
|
|
|
eken
InsanelyMac Protégé
|
![]() |
Oct 18 2008, 02:39 PM Post #58
|
|
|
|
Eddie94
iDeneb Team Member
|
![]() |
Oct 18 2008, 04:14 PM Post #59
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
BIIIIIIIIIIIF MadTux!!!!!!!!!!!!THE DRIVER WORK!WORK!HDAEnebler from HERE (post 43) + MadTux ALC861VD Toshiba!Thanks!Work:
sound,Mic!But if i plug the headphone no suond! Thanks!
Attached File(s)
|
|
MadTux
InsanelyMac Geek
|
![]() |
Oct 18 2008, 04:27 PM Post #60
|
![]() ![]()
|
I just try to remove the Azalia kext and install the ALC861 again, it still don't work. And Used HDAEneabler? BIIIIIIIIIIIF MadTux!!!!!!!!!!!!THE DRIVER WORK!WORK!HDAEnebler from <a href="http://"http://forum.insanelymac.com/index.php?showtopic=123057&st=0"" target="_blank">HERE</a> (post 43) + MadTux ALC861VD Toshiba!Thanks!Work: sound,Mic!But if i plug the headphone no suond! Thanks! I will fix headphones. BIIIIIIIIIIIF MadTux!!!!!!!!!!!!THE DRIVER WORK!WORK!HDAEnebler from <a href="http://"http://forum.insanelymac.com/index.php?showtopic=123057&st=0"" target="_blank">HERE</a> (post 43) + MadTux ALC861VD Toshiba!Thanks!Work: sound,Mic!But if i plug the headphone no suond! Thanks! Headphones should be fixed now. |
![]() |
|
Lo-Fi Version | Time is now: 22nd November 2009 - 07:55 AM |