Release for Toshiba Satellite P10x users: modded BIOS to try and activate Conexant sound chip, already working on three moddels Options

[jazzminos]

Hi, geiman! It is very nice to see You here Do you have any ideas about how to make my fans work... I'm just about to open the laptop and to reconnect my fans to make the work continuously... I've spent a lot of time using Your patched BIOS... And I havn't had any problems with fans. Should I go back to use it... With 2 unknown devices in XP? It seems that Your version of BIOS was the most working. I had sound... But it disappeared with 2Gb memory banks. Can You help me with this 2 problems?

It is nice that You have made Your laptop working with SL... Can You post here a small tutorial... With needed kexts of course

With great respect, jazzminos.

[jazzminos]

Roll Back to geimans 4.0 BIOS doesn't help with fans in 10.5.7

[geiman]

I wish I could help you with your fans problem, but I don't know of anything off the top of my head to help you.. I'll look around a bit. My fans work ok, but I have to use Voodoo power kext in order to get speed stepping working correctly. It also detects my cpus minimum frequency to be about 1003 MHz; I used to be able to get it to recognize a minimum value in the 900's or 800's, maybe lower. its been so long that I can't remember; anyways, I have never been able to get it back that low, but even with the 1003 MHz speed it hangs around ~46 C.

I know that the SMBIOS especially has a great influence on all of this, at least for me; might want to fool with different variations or even try and edit one for yourself.

As for the Snow Leopard tutorial, you can follow this one:

http://www.infinitemac.com/f57/how-to-inst...-on-a-pc-t3137/

I followed this one, so I figured it better for you to get the information first hand rather than through me. I did the tutorial exactly, and just moved whatever kexts I used in Leopard over to my Snow Leopard partition and they worked! (And of course your patched DSDT, unless you directly patched your bios)

Let me know how you make out, meanwhile I'll try and see if I can find anything else to help you.

[jazzminos]

Hi, friends. I solved the fan problem radically... Now I have manually adjustable fan. I've opened laptop and connected the fan to one of the USB ports... The speed is adjusted with a little regulator. Now is the time to think about other things

[mentorek]

Slightly OT:

Does anyone of you guys is still using Disabler.kext? I've started cleaning my Extensions folder and had successfully removed couple of Extensions I do not need.
I've read that Disabler.kext might have an influence on FireWire behavior (read: bandwith and cpu usage) and would like to fix it.
I've tried to remove it (Disabler.kext) but then I get KP mentioning AppleEFINVRAM.kext and AppleEFIRuntime.kext

So, my question is: is it possible for me (us?) to stop using this kext? or not?

Thanks in advance for your responses,
mentorek

EDIT:

These are the kexts that are being used by my installation. Shall I remove anything else that is not needed anymore?

CODE

Index Refs Address    Size       Wired      Name (Version) <Linked Against>
    1    1 0x0        0x0        0x0        com.apple.kernel (9.7.0)
    2   46 0x0        0x0        0x0        com.apple.kpi.bsd (9.7.0)
    3    3 0x0        0x0        0x0        com.apple.kpi.dsep (9.7.0)
    4   66 0x0        0x0        0x0        com.apple.kpi.iokit (9.7.0)
    5   69 0x0        0x0        0x0        com.apple.kpi.libkern (9.7.0)
    6   61 0x0        0x0        0x0        com.apple.kpi.mach (9.7.0)
    7   33 0x0        0x0        0x0        com.apple.kpi.unsupported (9.7.0)
    8    1 0x0        0x0        0x0        com.apple.iokit.IONVRAMFamily (9.7.0)
    9    1 0x0        0x0        0x0        com.apple.driver.AppleNMI (9.7.0)
   10    1 0x0        0x0        0x0        com.apple.iokit.IOSystemManagementFamily (9.7.0)
   11    1 0x0        0x0        0x0        com.apple.iokit.ApplePlatformFamily (9.7.0)
   12   26 0x0        0x0        0x0        com.apple.kernel.6.0 (7.9.9)
   13    1 0x0        0x0        0x0        com.apple.kernel.bsd (7.9.9)
   14    1 0x0        0x0        0x0        com.apple.kernel.iokit (7.9.9)
   15    1 0x0        0x0        0x0        com.apple.kernel.libkern (7.9.9)
   16    1 0x0        0x0        0x0        com.apple.kernel.mach (7.9.9)
   17   15 0x1ae20000 0x15000    0x14000    com.apple.iokit.IOPCIFamily (3.3.0) <7 6 5 4>
   18   13 0x1ae3b000 0x4000     0x3000     com.apple.iokit.IOACPIFamily (1.2.0) <12>
   19    6 0x1ae8a000 0x3e000    0x3d000    com.apple.driver.AppleACPIPlatform (1.2.4) <18 17 12 7 5 4>
   20    0 0x1aef5000 0x2000     0x1000     net.osrom.kext.Disabler (1.0.1) <12>
   21    0 0x1af80000 0x1f000    0x1e000    com.apple.driver.AppleIntelCPUPowerManagement (76.0.0) <12 7 6 5 4 2>
   22    0 0x1afb4000 0x5000     0x4000     com.apple.BootCache (30.4) <7 6 5 4 2>
   23    5 0x1b07b000 0x39000    0x38000    com.apple.iokit.IOHIDFamily (1.5.5) <7 6 5 4 2>
   24    0 0x1b114000 0x18000    0x17000    com.apple.security.seatbelt (107.12) <7 6 5 3 2>
   25    0 0x1b136000 0x3000     0x2000     com.apple.security.TMSafetyNet (3) <7 6 5 3 2>
   26    0 0x1b150000 0x8000     0x7000     com.apple.nke.applicationfirewall (1.6.77) <7 6 5 4 2>
   27    0 0x1b1a8000 0x3000     0x2000     com.apple.driver.AppleAPIC (1.4) <5 4>
   28    0 0x1b1bd000 0x4000     0x3000     com.apple.driver.AppleSMBIOS (1.1.1) <7 5 4>
   30    1 0x20ccb000 0x3000     0x2000     com.apple.iokit.IOSMBusFamily (1.1) <6 5 4>
   31    0 0x20d1e000 0x5000     0x4000     com.apple.driver.AppleACPIEC (1.2.4) <30 19 18 12>
   32    0 0x20d5c000 0x3000     0x2000     com.apple.driver.AppleHPET (1.4) <18 7 6 5 4>
   33    0 0x20d9e000 0x5000     0x4000     com.apple.driver.AppleRTC (1.2.3) <18 6 5 4 2>
   34    0 0x20e9a000 0x2000     0x1000     org.tgwbd.driver.ACPIPS2Nub (1.0.0d1) <19 18 12>
   35    0 0x20fb4000 0x4000     0x3000     com.apple.driver.AppleACPIButtons (1.2.4) <23 19 18 7 6 5 4 2>
   37    0 0x21108000 0x3000     0x2000     com.apple.driver.AppleACPIPCI (1.2.4) <19 18 17 12>
   38    2 0x211c1000 0x5000     0x4000     com.apple.driver.ApplePS2Controller (1.1.0) <12>
   39    0 0x21215000 0x2b000    0x2a000    at.obdev.nke.LittleSnitch (2.1.01) <7 6 5 4 2>
   40    8 0x21315000 0x2a000    0x29000    com.apple.iokit.IOUSBFamily (3.4.4) <7 6 5 4 2>
   41    0 0x2138a000 0xe000     0xd000     com.apple.driver.AppleUSBUHCI (3.4.4) <40 17 7 6 5 4>
   42    3 0x21417000 0xd000     0xc000     com.apple.iokit.IOATAFamily (2.0.1) <6 5 4 2>
   43    0 0x21435000 0x9000     0x8000     com.apple.driver.AppleIntelPIIXATA (2.0.0) <42 17 6 5 4>
   44    9 0x214a2000 0x18000    0x17000    com.apple.iokit.IOStorageFamily (1.5.6) <7 6 5 4 2>
   46    0 0x2158b000 0x12000    0x11000    com.apple.driver.AppleUSBEHCI (3.4.4) <40 17 7 6 5 4>
   47    0 0x21776000 0x3000     0x2000     com.apple.driver.ApplePS2Keyboard (1.1.0) <38 23 12>
   48    5 0x2186d000 0x3f000    0x3e000    com.apple.iokit.IOFireWireFamily (3.4.7) <6 5 4 2>
   49    0 0x218e3000 0x22000    0x21000    com.apple.driver.AppleFWOHCI (3.8.2) <48 17 7 6 5 4 2>
   51    4 0x21b5c000 0x19000    0x18000    com.apple.iokit.IOSCSIArchitectureModelFamily (2.0.9) <6 5 4 2>
   52    0 0x21b97000 0x4000     0x3000     com.apple.iokit.IOATAPIProtocolTransport (1.5.2) <51 42 12>
   53    0 0x21bec000 0x2000     0x1000     com.apple.iokit.IOUSBUserClient (3.3.1) <40 6 5 4>
   54    0 0x21c5a000 0x6000     0x5000     com.apple.iokit.SCSITaskUserClient (2.0.9) <51 44 6 5 4 2>
   55    0 0x21cd7000 0xc000     0xb000     com.apple.driver.AppleUSBHub (3.4.0) <40 6 5 4>
   56    3 0x21dc6000 0x8000     0x7000     com.apple.iokit.IOCDStorageFamily (1.5) <44 6 5 4 2>
   57    2 0x21e06000 0x6000     0x5000     com.apple.iokit.IODVDStorageFamily (1.5) <56 44 6 5 4 2>
   58    1 0x21e42000 0x17000    0x16000    com.apple.iokit.IOSCSIBlockCommandsDevice (2.0.9) <51 44 6 5 4 2>
   59    1 0x21e80000 0x5000     0x4000     com.apple.iokit.IOBDStorageFamily (1.5) <57 56 44 6 5 4 2>
   60    0 0x21ec7000 0x16000    0x15000    com.apple.iokit.IOSCSIMultimediaCommandsDevice (2.0.9) <59 58 57 56 51 44 6 5 4 2>
   61    0 0x21fc9000 0xe000     0xd000     com.apple.iokit.IOATABlockStorage (2.0.5) <44 42 6 5 4 2>
   62    0 0x22030000 0x5000     0x4000     com.apple.driver.XsanFilter (2.7.91) <44 12>
   63    0 0x22083000 0x4000     0x3000     com.apple.driver.AppleUSBComposite (3.2.0) <40 5 4>
   64    0 0x22138000 0x5000     0x4000     com.apple.iokit.IOUSBHIDDriver (3.2.2) <40 23 6 5 4>
   65    0 0x1ad01000 0x5000     0x4000     com.apple.driver.ApplePS2Trackpad (1.1.0) <38 23 12>
   67    2 0x1ad13000 0x10000    0xf000     com.apple.iokit.IOFireWireAVC (2.2.3) <48 6 5 4 2>
   68    0 0x1ad23000 0x4000     0x3000     com.apple.driver.AppleACPIThermal (1.2.4) <19 18 12>
   69    2 0x1ad27000 0x5000     0x4000     com.apple.iokit.CHUDKernLib (196) <12 7 5 4 2>
   70    0 0x1ad2c000 0xc000     0xb000     com.apple.iokit.CHUDProf (207) <69 12 2>
   71    5 0x1ad38000 0x16000    0x15000    com.apple.iokit.IONetworkingFamily (1.6.1) <7 6 5 4 2>
   72    0 0x1ad4e000 0x1d000    0x1c000    com.apple.driver.AppleIntel8254XEthernet (2.1.2b1) <71 17 6 5 4 2>
   73    0 0x1ad99000 0x4000     0x3000     com.apple.driver.AppleACPIPowerSource (1.2.4) <19 18 12>
   74    1 0x1af0d000 0x1f000    0x1e000    com.apple.iokit.IO80211Family (216.1) <71 7 6 5 4 2>
   75    0 0x2a588000 0x90000    0x8f000    com.apple.driver.AirPort.Atheros (319.10.3) <74 71 17 7 6 5 4 2>
   76    1 0x1adc1000 0x9000     0x8000     com.apple.driver.AppleSMC (2.2.1d2) <18 7 6 5 4>
   77    1 0x1afc9000 0xe000     0xd000     com.apple.driver.IOPlatformPluginFamily (3.4.0d10) <12 4>
   78    0 0x1afd7000 0x12000    0x11000    com.apple.driver.ACPI_SMC_PlatformPlugin (3.4.0d10) <77 76 18 17 12 7 6 5 4>
   79    4 0x1afe9000 0x1d000    0x1c000    com.apple.iokit.IOGraphicsFamily (1.7.3) <17 7 6 5 4>
   80    2 0x1b006000 0xe000     0xd000     com.apple.iokit.IONDRVSupport (1.7.3) <79 17 7 6 5 4>
   81    2 0x2a618000 0x25f000   0x25e000   com.apple.NVDAResman (5.4.4) <80 79 17 6 5 4 2>
   82    0 0x2a877000 0x1cb000   0x1ca000   com.apple.nvidia.nv40hal (5.4.4) <81 5 4>
   83    0 0x1adca000 0x3000     0x2000     com.apple.driver.AppleLPC (1.2.12) <17 6 5 4>
   84    0 0x1af2c000 0x9000     0x8000     com.apple.iokit.IOFireWireIP (1.7.7) <71 48 6 5 4 2>
   86    1 0x1af9f000 0x3000     0x2000     com.apple.kext.OSvKernDSPLib (1.1) <6 5>
   87    2 0x1b0e0000 0x17000    0x16000    com.apple.iokit.IOAudioFamily (1.6.9fc3) <86 6 5 4 2>
   88    1 0x21285000 0x48000    0x47000    com.apple.driver.AppleFWAudio (2.0.1fc1) <87 67 48 12>
   90    0 0x1b0f7000 0x3000     0x2000     com.apple.driver.AppleMLANAudio (2.0.1fc1) <88 67 48 12>
   91    0 0x1b19d000 0x6000     0x5000     com.markspace.driver.RemoteNDIS (438) <71 40 6 5 4 2>
   92    0 0x2aa42000 0x98000    0x97000    com.apple.GeForce (5.4.4) <81 80 79 17 12 6 5 4 2>
   93    0 0x1b12c000 0x3000     0x2000     com.x86dev.driver.lspcidrv (1.0) <12>
   94    0 0x20c60000 0x10000    0xf000     com.apple.driver.DiskImages (199) <44 7 6 5 4 2>
   96    0 0x1b1af000 0x4000     0x3000     com.apple.driver.AudioIPCDriver (1.0.6) <87 6 5 4 2>
   97    0 0x20c19000 0x7000     0x6000     com.apple.iokit.CHUDUtils (200) <69 6 5 4 2>
   98    0 0x20c20000 0x4000     0x3000     com.apple.driver.AppleUpstreamUserClient (2.7.5) <79 18 17 7 6 5 4 2>
   99    0 0x20c70000 0x4000     0x3000     com.superhai.driver.VoodooBattery (1.2.1) <18 5 4>
  100    0 0x1b026000 0x2000     0x1000     com.apple.dsmos (1.0.0d1) <7 5 4 2>
  101    0 0x20d23000 0x6000     0x5000     com.superhai.driver.VoodooPower (1.2.3) <12 7 6 5 4>
  102    0 0x1b1b3000 0x3000     0x2000     com.paceap.kext.pacesupport.leopard (5.6.2) <7 6 5 4 2>
  103    0 0x217f3000 0xb000     0xa000     com.apple.filesystems.autofs (2.0.2) <7 6 5 4 2>
  104    0 0x2aada000 0xd3000    0xd2000    com.vmware.kext.vmx86 (2.0.2) <12 6 5 4 2>
  105    0 0x21af7000 0xb000     0xa000     com.vmware.kext.vmci (2.0.2) <6 5 4 2>
  106    0 0x215c5000 0x6000     0x5000     com.vmware.kext.vmioplug (2.0.2) <40 23 6 5 4>
  107    0 0x21987000 0x9000     0x8000     com.vmware.kext.vmnet (2.0.2) <12 6 5 4 2>
  108    0 0x21bee000 0xd000     0xc000     com.apple.filesystems.msdosfs (1.5.4) <7 6 5 2>
  109    0 0x21d22000 0x5000     0x4000     com.apple.driver.AppleHWSensor (1.9d0) <6 5 4>

[jazzminos]

I don't use Disabler.kext... It seems that it is not necessary with DSDT.aml. I have loaded even AppleCPUPowerManagement. You need to delete Don'tStealMacOSX.kext. I've noticed that there are different versions of Disabler.kext. They are discribed on XxX v2. Do You have any news on sound problem?

With great respect, jazzminos.

[mentorek]

I don't use Disabler.kext... It seems that it is not necessary with DSDT.aml. I have loaded even AppleCPUPowerManagement. You need to delete Don'tStealMacOSX.kext. I've noticed that there are different versions of Disabler.kext. They are discribed on XxX v2. Do You have any news on sound problem?

With great respect, jazzminos.

Are you using 10.5.7? Which distribution (Kalyway/iPC/...?)? My installation is quite old and seems to have some leftovers from the base (10.5.1/10.5.2 Kalyway) which might have an impact.

Could you provide me with your extensions folder?

As for audio part - I haven't time to experiment much further. I've found one guy with a AppleHDA kext on some Russian forum but I couldn't neither download it (have to register) nor access it recently.

cheers,
mentorek

[jazzminos]

I use iAtkos 5i practically stock installation + Chameleon 2 (with GMA950b (Natit) driver from iAtkos) + Your DSDT.aml + AppleDecrypt + some files in Extra + latest PCI drivers by Chun Nan + VoodooPS2 + VoodooPower. Kernel & ACPI are fully stock... My sleep works.

I can't solve problem with SMBIOS... I don't know what to use... SMBIOSResolver worked in 10.5.6, but it doesn't work in 10.5.7. I always get a error with Computer Model in System Profiler.

Can You give me the link from Russian forum? I'm from Russia and I'll try to contact this guy.

Here's the link to my Extensions+Extra folders archive http://rapidshare.com/files/251441497/Ext_Extra.zip.001.html

With great respect, jazzminos.

[mentorek]

I use iAtkos 5i practically stock installation + Chameleon 2 (with GMA950b (Natit) driver from iAtkos) + Your DSDT.aml + AppleDecrypt + some files in Extra + latest PCI drivers by Chun Nan + VoodooPS2 + VoodooPower. Kernel & ACPI are fully stock... My sleep works.

I can't solve problem with SMBIOS... I don't know what to use... SMBIOSResolver worked in 10.5.6, but it doesn't work in 10.5.7. I always get a error with Computer Model in System Profiler.

Can You give me the link from Russian forum? I'm from Russia and I'll try to contact this guy.

Here's the link to my Extensions+Extra folders archive http://rapidshare.com/files/251441497/Ext_Extra.zip.001.html

With great respect, jazzminos.

Try using smbios.plist in /Extra folder to solve (fill in) infos in System Profiler.

The link: http://www.applelife.ru/kak_sdelat_hda_zvuk/12860/850.html
I didn't figure out how to use those kexts he provided.

Thanks for the your extensions - I will get back to you with the outcome.

cheers,
mentorek

[mentorek]

Try using smbios.plist in /Extra folder to solve (fill in) infos in System Profiler.

The link: http://www.applelife.ru/kak_sdelat_hda_zvuk/12860/850.html
I didn't figure out how to use those kexts he provided.

Thanks for the your extensions - I will get back to you with the outcome.

cheers,
mentorek

It seems that my installation is so f*cked up that I have(?) to use Disabler.kext and God knows what!
I will try to reinstall it using iPC 10.5.6 and see if that would change anything.

Any news on Legacy* kexts from Clubber77?

[clubber_77]

Any news on Legacy* kexts from Clubber77?

New version AppleHDA.kext (from 10.5.7) for Conexant Cx20551 is ready. Post #1609 (to look in a topic)

Speakers-work
Нeadphones-work
internal Microphone - work
external Microphone - work

[mentorek]

New version AppleHDA.kext (from 10.5.7) for Conexant Cx20551 is ready. Post #1609 (to look in a topic)

Speakers-work
Нeadphones-work
internal Microphone - work
external Microphone - work

Thanks for an update.
Just to be sure... I should only copy this file over to my Extensions folder and that's it?

EDIT:

Shall I change any nodes anywhere?
Could you upload this kext on mediafire or rapidshare?

[jazzminos]

Here is the kext, but it doesn't work for me...

http://rapidshare.com/files/252557301/AppleHDA.kext.zip.html

[clubber_77]

Thanks for an update.
Just to be sure... I should only copy this file over to my Extensions folder and that's it?

copy this file over to your Extensions folder, repair permissions, clear cache, and reboot

Shall I change any nodes anywhere?

If it is required, such possibility is...

Could you upload this kext on mediafire or rapidshare?

Click Here

Here is the kext, but it doesn't work for me...

The sound is started with VoodooHDA?
upload your linux dump and VoodooHDA dump somewhere...

[jazzminos]

I have a Kernel Panic with VoodooHDA... I can't create log.

[clubber_77]

I have a Kernel Panic with VoodooHDA... I can't create log.

Sorry,I can't explain it...

[mentorek]

copy this file over to your Extensions folder, repair permissions, clear cache, and reboot
If it is required, such possibility is...
Click Here
The sound is started with VoodooHDA?
upload your linux dump and VoodooHDA dump somewhere...

Hi guys,

Partial success! At the moment my Headphone jack IS working (it's marked as Internal Speakers though), in Audio Midi Setup I have only Built-in Microphone options available and no controls for output.
Probably I would need some tweaks in plist files to make the rest (Internal Speakers, Line In and Mic) working.

Clubber_77 - I've attached my linux dump as VoodooHDA is not working for me (Kernel Panic). Could you please help me with updating correct Info.plist?

cheers,
mentorek

Attached File(s)

 codec.txt ( 4.79K ) Number of downloads: 4

 

[clubber_77]

Hi guys,

Partial success! At the moment my Headphone jack IS working (it's marked as Internal Speakers though), in Audio Midi Setup I have only Built-in Microphone options available and no controls for output.
Probably I would need some tweaks in plist files to make the rest (Internal Speakers, Line In and Mic) working.

Clubber_77 - I've attached my linux dump as VoodooHDA is not working for me (Kernel Panic). Could you please help me with updating correct Info.plist?

cheers,
mentorek

I have no datasheet on this codec!!
The information about Conexant Cx20551 has not enough...
Linux dump does not give the full information!
VoodooHDA dump all would simplify...
I will try to help something...

CODE

Codec: Conexant CX20551 (Waikiki)
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x1179ff31
Revision Id: 0x100000
Modem Function Group: 0x2
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Converter: stream=0, channel=0
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 6
0x19 0x14 0x15 0x1a* 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x081001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0xc3111010: [Both] Speaker at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=37, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x19 0x10* 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Pincap 0x0833c: IN OUT HP Detect
Vref caps: HIZ 50
Pin Default 0x03811011: [Jack] Line In at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Pincap 0x0833c: IN OUT HP Detect
Vref caps: HIZ 50
Pin Default 0x03a11012: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=38, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x1c 0x19* 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x0860: IN Balanced
Pin Default 0x99330100: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power: setting=D0, actual=D0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x08324: IN Detect
Vref caps: HIZ 50
Pin Default 0xb7a00100: [Fixed] Mic at Oth Mobile-In
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x21440100: [Jack] SPDIF Out at Sep Rear
Conn = RCA, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x80 0x80] [0x80 0x80] [0x17 0x17]
Power: setting=D0, actual=D0
Connection: 4
0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
Amp-Out vals: [0x03 0x03]
Power: setting=D0, actual=D0
Connection: 3
0x15 0x14 0x17*
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 2
0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Converter: stream=0, channel=0
PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x18 0x18]
Pincap 0x08314: OUT Detect
Vref caps: HIZ 50
Pin Default 0x90100112: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x1, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x1c 0x19* 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono

It really yours dump???

Please make dump in Linux Mandriva PowerPack 2009

[mentorek]

I have no datasheet on this codec!!
The information about Conexant Cx20551 has not enough...
Linux dump does not give the full information!
VoodooHDA dump all would simplify...
I will try to help something...

CODE

cut

It really yours dump???

Please make dump in Linux Mandriva PowerPack 2009

IIRC it has been made using Mandriva 2009 but not PowerPack... I can try to download it and create a dump once again if needed.
Is VoodooHDA creating more detailed dump?
BTW. I can provide you with Vista verbs (and also my slightly modified version to reflect OSX reqs) if that would help at all.

Thanks for your help!

mentorek

[clubber_77]

IIRC it has been made using Mandriva 2009 but not PowerPack... I can try to download it and create a dump once again if needed.

download this or this

dump should differ from yours,- it can explain (clear) something

Is VoodooHDA creating more detailed dump?

VoodooHDA supplements the data received from Linux dump.
Helps to build sequence nodes.

I can provide you with Vista verbs (and also my slightly modified version to reflect OSX reqs) if that would help at all.

It can help.