solution marvell 88E8055 is work, use PCCard.10.5.2.Beta2.pkg.zip and delete dict Options

[nolifelover]

i can solution marvell 88E8055 work full with PCCard.10.5.2.Beta2.pkg.zip
thank EqUaTe foe patch PCCard.10.5.2.Beta2.pkg.zip
1. you should to edit AppleYokon2.kext
cd /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext
cd Contents
sudo nano Info.plist
2. you find <key>Yukon-88E8055</key> and delete all
3. edit <key>Yukon-88E8053</key> to <key>Yukon-88E8055</key>
4. edit <string>0×436211ab</string> to <string>0×436311ab</string>
5. edit <string>Yukon Gigabit Adapter 88E8053 Singleport Copper SA</string> to
<string>Yukon Gigabit Adapter 88E8055 Singleport Copper SA</string>
6. Ctrl+O enter and Ctrl+q to exit
7. download and install PCCard.10.5.2.Beta2.pkg.zip
8. reboot
9.is work



thank EqUaTe
i ahve problem with alc262 is can't use headphone and mice if you can patch please pm to me
you can see install benqs32w

and is my .kext
 IONetworkingFamily.zip ( 1.91MB ) Number of downloads: 2462

[jmvBMW]

You have leopard? Will work on tiger?

[nolifelover]

i don't test in tiger

[Gombado]

Delete all (<key>Yukon-88E8055</key>) or just the numbers (88E8055) ?

[nolifelover]

delete all dict Yukon-88E8055 first <dict>......</dict> and edit dict 88E8053 to 88E8055

[Lenzius]

I know it is templting, folks, but DO NOT download and install the PC Card file unless you have 10.5.2. It WILL cause kernel panic. I speak from sad experience. It was one of those little nooby moments we all have when we throw logic to the wind and do something stupid out of desperation.

*sigh*

btw, i have 10.4.8

[stranger666]

i can solution marvell 88E8055 work full with PCCard.10.5.2.Beta2.pkg.zip

Thank you.
Now I can use an Internet by my notebook Sony VAIO VGN-TZ3RMN. (Kalyway 10.5.1)

[nzouber]

Thanks so much nolifelover!! Your the best!! now I can finally make my ethernet card work!

[VRuler]

i have a marvell yukon 88E8053 PCI-E Gigabit Ethernet Controller and want to install 10.5.3, will this work for me ? pls pm me

[sOS_X]

i can solution marvell 88E8055 work full with PCCard.10.5.2.Beta2.pkg.zip
thank EqUaTe foe patch PCCard.10.5.2.Beta2.pkg.zip
1. you should to edit AppleYokon2.kext
cd /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext
cd Contents
sudo nano Info.plist
2. you find <key>Yukon-88E8055</key> and delete all
3. edit <key>Yukon-88E8053</key> to <key>Yukon-88E8055</key>
4. edit <string>0×436211ab</string> to <string>0×436311ab</string>
5. edit <string>Yukon Gigabit Adapter 88E8053 Singleport Copper SA</string> to
<string>Yukon Gigabit Adapter 88E8055 Singleport Copper SA</string>
6. Ctrl+O enter and Ctrl+q to exit
7. download and install PCCard.10.5.2.Beta2.pkg.zip
8. reboot
9.is work



thank EqUaTe
i ahve problem with alc262 is can't use headphone and mice if you can patch please pm to me
you can see install benqs32w

and is my .kext
 IONetworkingFamily.zip ( 1.91MB ) Number of downloads: 2462

You just MADE MY DAY

Thanks so much. Now all i need to fix is the resolution on my VAIO TZ (1366x768 not available) and see if i could possibly find a driver for the IntelPro wireless.

Love your work

[josef_rocks]

does this work on yukon marvel 88E8039?

[SoundForSoul]

I did exactly as mentioned in the first post, but it didn't work .. I installed PCCard.10.5.2.Beta3 then, and, after rebbot, it stops saying that IO Network could not .. something .. is there any way to skip that step or .. whatever i could do to enter in my leopard again ???
I have Kalyway 10.5.2 installed .

Thank you so much in advance !

[OCORHI]

Thanks
This works on itakos V4i with Marvell 8055

[danyf90]

i can solution marvell 88E8055 work full with PCCard.10.5.2.Beta2.pkg.zip
thank EqUaTe foe patch PCCard.10.5.2.Beta2.pkg.zip
1. you should to edit AppleYokon2.kext
cd /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext
cd Contents
sudo nano Info.plist
2. you find <key>Yukon-88E8055</key> and delete all
3. edit <key>Yukon-88E8053</key> to <key>Yukon-88E8055</key>
4. edit <string>0×436211ab</string> to <string>0×436311ab</string>
5. edit <string>Yukon Gigabit Adapter 88E8053 Singleport Copper SA</string> to
<string>Yukon Gigabit Adapter 88E8055 Singleport Copper SA</string>
6. Ctrl+O enter and Ctrl+q to exit
7. download and install PCCard.10.5.2.Beta2.pkg.zip
8. reboot
9.is work



thank EqUaTe
i ahve problem with alc262 is can't use headphone and mice if you can patch please pm to me
you can see install benqs32w

and is my .kext
 IONetworkingFamily.zip ( 1.91MB ) Number of downloads: 2462

I installed yukon2 driver from your kext  IONetworkingFamily.zip ( 1.91MB ) Number of downloads: 2462
, I exactly do what your guide says, but when i reboot my kalyway 10.5.2 the ethernet light turn off, infact in System preference/network i see a ethernet connection configuration, but it says that the cable is not connected ( it isnt true). i have a 88E8055 yukon. PLEASE SOMEONE HELP ME. SORRY FOR MY ENGLISH

[ronaldBE]

heh, made my machine not boot anymore

[Them Apples]

I only had to edit the info list per your instructions with 10.5.5 (10.5.5 Ideneb) and Sony VGN-FW160D which uses the Marvell 88e8055. Thanks so much. Now if I can get the wifi and hd3470 working properly. The experiment continues.

[MrReview]

Thanks a lot... It's recognized and I'm connected to the internet :-)

But one thing was curious... MAC told me, that this was my AirPort ;-) Renamed to Ethernet - just for the eyes!

THANKS AGAIN!!!!!

[mixomix]

What about 88E8040 ? Did anyone give a try?

[PhreakyMike]

THANK YOU. This worked for me too... Ethernet down, wireless and audio to go. For the record, I have Fujistu C1410 with Vista and Kalyway 10.5.2 Dual boot.

[Smilez:)]

I'm using a Sony FW160D with 10.5.5 Kalyway. I did the editting of the AppleYukon2.kext file and changed the id of the 88E8053 to 88E8055 and delete the orginal 88E8055 section. reset the permissions and rebooted. Works great.