Samsung NC10 UK revision, Updates / Installation / Modding etc, stuff will be here Options

[ Mysticus C*]

I'll try to do it later today or tomorrow

thanx, it will be more informative and helpful... for future...

as soon as i collected enough money for it, i will be doing it, and if someone did it earlier, it is easier to avoid accidents etc trouble...

cheers

[RT91]

Hey i figured out after restoring my windows install the mac one became corrupt can i repair it using the DVD?As when i boot into my mac install it comes up with a missing error,If i can't repair the install
If so what command do i use?

Where can i donwload the nc10 10.5.5 driver package so i can install the original 10.5.4 and just update it to 10.5.5 using your guide i used before
Thanks

[ Mysticus C*]

Hey i figured out after restoring my windows install the mac one became corrupt can i repair it using the DVD?As when i boot into my mac install it comes up with a missing error,If i can't repair the install
If so what command do i use?

Where can i donwload the nc10 10.5.5 driver package so i can install the original 10.5.4 and just update it to 10.5.5 using your guide i used before
Thanks

read post #1 everything you need to know is there

my suggestion: if you still have 10.5.4 jas dvd iso, just download the ppf!! and apply it, you will get 10.5.6 otb...

[tazevil666]

Hello guy

Merry Christmas !!!
My dear Mysticus, all is working perfectly on my NC10 ! So nice ! The only problem I have is I don't have any informations concerning Touchpad in Preference Panel !!! :s
Do you know why ? Maybe it's possible to reinstall it ?

Nick14, we are waiting for your tips and guide concerning touchscreen ^^

Thanks

[RT91]

read post #1 everything you need to know is there

my suggestion: if you still have 10.5.4 jas dvd iso, just download the ppf!! and apply it, you will get 10.5.6 otb...

I'v read it and i can't see the 10.5.5 driver pack...?
I'd rather not upgrade to 10.5.6 as i was happy with 10.5.5 and i allready have the dvd burnt(very short of them)

Also my isp shares one isp and won't be able to download off RS for another 5-6 hours

Do you know if the jas-nc10 ppf dvd can be used to repair the install as i don't want to loose it really?
Like how you would repair you windows install with the install cd

Thanks

And merry chrstmas and have a good new year everyone

[ Mysticus C*]

tazevil: read post #846 in previous page for how to get toucpad/settings... and page 40 post#795 to see where to look for the settings please! learn to read before you post!

rt91: there is a torrent link as well for the 10.5.6 iso, and you dont know what you are missing with this release! fastest and the best so far! almost , almost everything working i look forward, and 10.5.5 is behind already... if you insist on 10.5.5 still here is the file but i highly suggest you to do what i said...

[RT91]

tazevil: read post #846 in previous page for how to get toucpad/settings... and page 40 post#795 to see where to look for the settings please! learn to read before you post!

rt91: there is a torrent link as well for the 10.5.6 iso, and you dont know what you are missing with this release! fastest and the best so far! almost , almost everything working i look forward, and 10.5.5 is behind already... if you insist on 10.5.5 still here is the file but i highly suggest you to do what i said...

I will download that soon,as i'll be on a 20MB connection next week,until then i am on less than 1mb and don't want to face into a slow web browsing experience while the torrent downloads for 2 days ..Cheers for the link

[adamcarter]

Hey Myst....wanted to let you know I installed the brodcom 1505 bgn wifi card works like a charm... in the system profiler it says third party card...(no biggie)....

one thing though
when I have the battery out and only use the power cord. the computer including the energy saving preference pane believe it is running on battery mode. For instance when running updates it says I should plug in, and it dims in 3 minutes (which is the dim setting I picked for battery mode only) versus 15 min for power cord.
I know you said you were working on the sleep issue, could this be the root of the problem?

thanks

[ Mysticus C*]

Hey Myst....wanted to let you know I installed the brodcom 1505 bgn wifi card works like a charm... in the system profiler it says third party card...(no biggie)....

one thing though
when I have the battery out and only use the power cord. the computer including the energy saving preference pane believe it is running on battery mode. For instance when running updates it says I should plug in, and it dims in 3 minutes (which is the dim setting I picked for battery mode only) versus 15 min for power cord.
I know you said you were working on the sleep issue, could this be the root of the problem?

thanks

sleep issue is in bios/acpi -->dsdt tables... i made a solution already but didnt have time to test it yet... wife is busy with it

[tutti]

Hey Mysticus,
following on my earlier post: I realized that i forgot to customize the mac os x install, so i selected the nc10 package and it booted fine!


Thank you so much!

[RT91]

Just to let everyine know samsung have recently released the 0.4CA bios

[ Mysticus C*]

Just to let everyine know samsung have recently released the 0.4CA bios

if you provide the link, it would be better and more helpful

the link is for the US models

[adamcarter]

sleep issue is in bios/acpi -->dsdt tables... i made a solution already but didnt have time to test it yet... wife is busy with it

What do you think about the energy saving thing...that it always thinks it is running on battery (when battery is out and is plugged in only.)

[ Mysticus C*]

What do you think about the energy saving thing...that it always thinks it is running on battery (when battery is out and is plugged in only.)

i dont have that issue, what is your base installation version? and current version?

[adamcarter]

I used the 10.5.6 nc10 iso that someone put up on demonoid.

All I know is when running the software updates for the small things like update iwork update quicktime component etc. it would say you should plug into power source for all installs. (i was but had no battery in it, i try and save the cycles for when I am at school). Also (as I am on power cord only) the screen dims after 1 min which is my energy settings for battery, the energy savings for power plug is 15 min and yet it dims at 1 min. So I am not sure why it does that...
its kinda hard to explain i hope that makes more sense.

I have a feeling when both are in it will work normally, but like i said I usually work with the battery taken out.

[ Mysticus C*]

I used the 10.5.6 nc10 iso that someone put up on demonoid.

All I know is when running the software updates for the small things like update iwork update quicktime component etc. it would say you should plug into power source for all installs. (i was but had no battery in it, i try and save the cycles for when I am at school). Also (as I am on power cord only) the screen dims after 1 min which is my energy settings for battery, the energy savings for power plug is 15 min and yet it dims at 1 min. So I am not sure why it does that...
its kinda hard to explain i hope that makes more sense.

I have a feeling when both are in it will work normally, but like i said I usually work with the battery taken out.

i tested it without battery and it shows no battery, i plugged the battery, and battery showed up, took it off, it went away again... so no battery issue here... did you somehow install any previous driver pack after the dvd install? like 10.5.6 install pack or any previous one?

[adamcarter]

i tested it without battery and it shows no battery, i plugged the battery, and battery showed up, took it off, it went away again... so no battery issue here... did you somehow install any previous driver pack after the dvd install? like 10.5.6 install pack or any previous one?

ok well when battery is out and just plugged in, it shows no battery, and when its in it shows battery.... I am just talking about the settings on the diming test it like this

go to energy settings select 1 min for battery mode and 15 min for power adapter mode for screen dim screen sleep whatever it is called.

now with battery in and power in see how long it takes to dim, then with battery in only see how long it takes to dim, and then try power only see how long it takes to dim,

I didnt install anything at all. afterward that didnt come from software update.

[RT91]

http://www.samsung.com/us/support/download...e=D&vType=R


bios link

[RT91]

Hello all i have a new error i'v got everything up and running but when i attempt to boot into mac osx it goes to the grey screen for 2 or 3 seconds and then crashes and reboots(sorry for all the questions)

Edit:
http://img296.imageshack.us/my.php?image=25112008069oh6.jpg
That is the error,found it further back in the thread...But that was not using Jas dvd...

I have already sucessfully installed,i formatted the disk and then tried to get into the os selection via the dvd it did not work,i rebooted and my os selection screen popped up
I edited my boot.ini as "C:\" was missing from infront of chain0 and rebooted,selected mac,then OSX 1 disk and the error appered....

[ Mysticus C*]

Hello all i have a new error i'v got everything up and running but when i attempt to boot into mac osx it goes to the grey screen for 2 or 3 seconds and then crashes and reboots(sorry for all the questions)

Edit:
http://img296.imageshack.us/my.php?image=25112008069oh6.jpg
That is the error,found it further back in the thread...But that was not using Jas dvd...

I have already sucessfully installed,i formatted the disk and then tried to get into the os selection via the dvd it did not work,i rebooted and my os selection screen popped up
I edited my boot.ini as "C:\" was missing from infront of chain0 and rebooted,selected mac,then OSX 1 disk and the error appered....

too many people reporting funny funny errors, caused by user's inability to understand or read the guides...

you are reporting an error on what? what did you install? which dvd? and when did it happen?

also did you read the very first page of the guide about bios settings...

I m kind of getting pissed off at some of the repeating problems... and no information given to get help... saying error error...

please state what version of osx you are using? jas? nc10 10.5.4? 10.5.5? 10.5.6?
when did the error happen? after what?

and please for gods sake read the through the posts as well, i m fed up answering repeated same questions!