Samsung NC10 UK revision, Updates / Installation / Modding etc, stuff will be here Options

[G4-Flo]

i dont know really didnt check any latest updates yet... you can reapply the nc10 1.1 package with nc10 option only...

Thanks for Idea, but doesn't work. Also repairing Permissions doesn't work. {censored}.

[ Mysticus C*]

Thanks for Idea, but doesn't work. Also repairing Permissions doesn't work. {censored}.

hmm i will check the updates... is it just pref pane doesnt work? or keyb also dont work?

[G4-Flo]

Solved the keyboard prefpane-issue: It's only if the system is in german. If I turn the system into english the prefpane works as usual.
Funny somehow ;-)

[ Mysticus C*]

ok guys some bad news and good news:

bad news: leopard hda drivers dont seem to wanna load...

(hope it is) good news: i checked for tiger drivers and see some light... it contains ich7 hda reference! meaning we may be able to get this running just hope...

1 step closer: it appears that i made a loadable applehda kext, but refusing to load due to layout-id property which means there is one one thing i need to find out, if it can load we will(maybe) finally able to get full audio support... hang on there... fingers crossed, and hopes are more than average...

note: either our codec (027210ec) will not load, or i m missing something fundamental...

it looks as if i hit another wall, i m overlooking something but i cant tell at the moment... if i cant find it, i will look into modding the azalia, since it loads fine, but correct mapping is not working for nodes (input/mixer/pin = each function in a sound card, like mic, input, line out, int speaker, hp, mic in, line in etc...)

[ Mysticus C*]

I am currently making a soup right now, mixed with applehda and azaliaaudio controller all mixed up to load partitial load up the driver lets see how it goes...

i m quite pissed at the moment, bcoz worked on this for a long time, and it does not wanna work correctly, my last couple of tests, and if it doesnt work, conclusion will be 0272 codec is not supported with current driver architecture.... cant think any other solution, so trying to mix up azalia with the hda

[Running With Scissors]

Why is it sound works on the Dell Mini 9 but doesn't work on most other netbooks. Does the mini 9 use the same chipset as the Sammy or different codec.

Anyway dont give up mate.

[Bedok]

Hey guys,

Great job on making the NC10 DVD dude, work fine on my machine.

What I did:
1 - Disk Utility to partition as GUID and 2 partition
2 - Install NC10 DVD on 1st partition
3 - Install Vista32 on the second partition
4 - use boot132 USB key to get on Leopard as Vista broke the bootloader
5 - Install Chameleon bootloader
6 - Reboot to check that Leopard is fixed

To get battery status back:
7 - Deleted Powermanagement.bundle
8 - Rename Powermanagement.bundle.orig (I assume the 10.5.4 vanilla) to powermanagement.Bundle
9 - Installed superhai's ACPIBattery.kext
(Sleep works only on battery and from choosing Sleep from drop down menu or Fn-Esc only, closing the lid do nothing, just switched off display. May need clamshell.kext like the one eeePC 1000H user used, going to read more into it)

To get proper processor name on About this Mac.
10 - Use OSX86Tools (Autoset CPU Info)

 Atom.tiff ( 617.69K ) Number of downloads: 27

[ Mysticus C*]

update news:


ladies and gentleman!!!!!

IT IS ALIVE IT IS WORKING!!!!

SPEAKER HEADPHONE INTERNAL MICROPHONE!!!! WORKING!!

NEWS TOMORROW

Well partially working but it is a start...

things to do now is to correctly pathmap devices... so they will work correctly... and need to define also external mic input...

here are some pictures of hope!!!


i m damn sleepy right now, at 3.50 am

tomorrow is fine tuning...

finally light of hope

[SL3]

update news:


ladies and gentleman!!!!!

IT IS ALIVE IT IS WORKING!!!!

SPEAKER HEADPHONE INTERNAL MICROPHONE!!!! WORKING!!

NEWS TOMORROW

You are a god amongst men.

[mudzilla]

Great work mate, as a token of my appreciation I've made a small donation towards your touch-screen project.

Keep up the amazing work.

[carlito86]

you are tha Black God of Leopard...amazing man,that's what you are

[Takanori Gomi]

That is truly amazing! You are an NC10 god. I will be getting one soon and seeing your progress on the NC10 makes my Christmas present better by the day. Awesome job.

[torpie13]

As I said, It will works Mystical , it will work

[ Mysticus C*]

There is still work to do!

Currently internal speaker is working just fine with the HDA driver like in the azalia driver scenerio!

Things to do:

+ Headphone mapping so that when you choose headphone it will work.... Currently when you choose headphone it sends the sound to something so no sound, however when you choose the internal speaker it works in internal speaker so not bad sign

+ Internal Mic showing but not working yet, I need to correctly map those devices one at a time (which takes 5-10 maybe more test for each until i get the correct configuration! but at least it shows up

+ External Mic Jack, currently not showing but it was not defined either, so another work to do!

+ System profiler in audio pan is showing, Speaker - Internal correct!, Mic 1/8 inc jack wrong as 1/8 jack is for external but we gotta fix it so it is on to do list!

Note: I almost abandoned the project and only in my last trial it worked I said hell with that, but damn it worked, so it looks like it will trouble me more
Thanx to: Thanx to J-S and R-D for donations money will be well spend for the touchscreen project...

[ Mysticus C*]

Breaking Update New!!!!!!!

Internal Mic is working is working some what working, it shows it very loud!! meaning some amplifying terms need to be defined...)
External Mic is Working!!!!!! (some what working, it shows some voice activity when i scream at it meaning some amplifying terms need to be defined... )
Internal Speaker is working as i said before, but headphone still not working, but hopefully will work soon

Volume controls working just fine, if hp works, no switching or anything just volume control will do it...

More goodies to come!!!!

[RealRooster]

Good work Mr. Mysticus!

Can I somehow extract a modified com.apple.boot.plist file from the OSX86_NC10 installation media?
If it's not possible, could someone send this file to me?

Thanks in advance!

Ok, got it already. Now I'm back in business.

[ Mysticus C*]

OK guys, I m kind of tired at the moment, my testing continues but, i will stop for a while to take a rest...

here is the download link for TEST1 package if you like to test it or use it as well

WORKING:
+ Internal speaker is working
+ Audio preference showing HP, Internal Speaker, 2 x Internal Mic
+ System profiler showing internal speaker, microphone jack

Not Working/Partitialy Working:
+ Internal Microphone 1 does not seem to be working (mapping or pinconfig problem?)
+ Internal Microphone 2 seems to be working but input power is quite low (due to amplifier issues)
+ HP is showing although not working. Though switching between HP and Internal Speaker is seemless
+ System profiler is not showing HP and internal microphone 1 due to either mapping or pinconfig

Possibilities:
+ Headphone may/may not work due to mapping/pinconfig/other settings/ or/ at worst case scenerio driver issue?
+ Internal Mic somehow worked or showed some signs at some of my trials but does not seem to work now...
+ External Mic (as seen in system second internal mic) has low input issue... So either settings or amplifier issue

Anyone want to help testing? fixing? free to do so... I worked on this thing quite a long time, and no response/help from people who made their topics, so it is kind of hard to work alone... anyone with knowledge welcomed to help... or know someone who has good knowledge would also be usefull..

I believe now that we may be able to get this thing fully work given the results

I am going to rest a bit now...

[Dust Mason]

Completed the install finally, thanks again for the guide Mysticus!

Ive restarted now and am trying to complete the setup assistant, but it keeps looping!

I mean it just lets me get as far as saying that I dont want to copy any info over from another mac, and then it plays the intro movie again and starts all over... Very odd, everything else has gone smoothly so far. Any ideas?

Im stuck at the 'Do You Already Own a Mac?' screen after restarting following the initial Samsung NC10 OSX Install.

Thanks

[ Mysticus C*]

Completed the install finally, thanks again for the guide Mysticus!

Ive restarted now and am trying to complete the setup assistant, but it keeps looping!

I mean it just lets me get as far as saying that I dont want to copy any info over from another mac, and then it plays the intro movie again and starts all over... Very odd, everything else has gone smoothly so far. Any ideas?

Im stuck at the 'Do You Already Own a Mac?' screen after restarting following the initial Samsung NC10 OSX Install.

Thanks

the issue seems to be happening on german versions at the moment, some other users had this and solved booting into safe mode and running a command, i forgot now, any german friends? please answer this question so others can see your solution...

just curiosity, do you choose german language at first screen when it asks about language country etc? if yes, please try choosing english keyb/language initially (you will be able to change it from system preferences again later) and try again? if it does not work, then like other german friends did, u ll need to go to safe mode...

[Dust Mason]

well you are spot on there - im on a german NC10, bought it in berlin, but i am setting it up completely in english

im gonna try going into safe mode, will post results. how do i do that again? thanks for the quick and informative reply!

EDIT

booted into safe mode with -s, made the fix detailed here http://osx86.wikidot.com/known-issues
looks to have solved it! thanks!