Jump to content

AppleHDA for ALC269VB (10.9 GM + ML 10.8.4) 2.5.2fc2 + 2.3.7fc4

darkera13
 Share

2 Screenshots

About This File

Codec: Realtek ALC269VB

Address: 0

Vendor Id: 0x10ec0269

Subsystem Id: 0x10431517

Revision Id: 0x100100

Device (HDEF)            {                Name (_ADR, 0x001B0000)  // _ADR: Address                OperationRegion (HDAR, PCI_Config, 0x4C, 0x10)                Field (HDAR, WordAcc, NoLock, Preserve)                {                    DCKA,   1,                     Offset (0x01),                     DCKM,   1,                         ,   6,                     DCKS,   1,                     Offset (0x08),                         ,   15,                     PMES,   1                }                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake                {                    Return (GPRW (0x0D, 0x04))                }                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method                {                    Store (Package (0x06)                        {                            "hda-gfx",                             Buffer (0x0A)                            {                                "onboard-1"                            },                             "layout-id",                             Buffer (0x04)                            {                                 0x1C, 0x00, 0x00, 0x00                            },                             "PinConfigurations",                             Buffer (Zero) {}                        }, Local0)                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))                    Return (Local0)                }            }

Not wok, try to patch HPET:

                    Name (_HID, EisaId ("PNP0103"))  // _HID: Hardware ID                    Name (_UID, Zero)  // _UID: Unique ID                    Name (BUF0, ResourceTemplate ()                    {                        IRQNoFlags ()                            {0}                        IRQNoFlags ()                            {8}                        IRQNoFlags ()                            {11}                        IRQNoFlags ()                            {15}                        Memory32Fixed (ReadWrite,                            0xFED00000,         // Address Base                            0x00000400,         // Address Length                            _Y10)                    })

What's New in Version 2.5.2fc2 + 2.3.7fc4   See changelog

Released

No changelog available for this version.

 Share
Previous File 10.9 GM AppleHDA for ALC662
Next File AppleHDA for VIA VT2020/VT2021-10.8.5-

User Feedback

Recommended Comments

X-TRiAL

Hey thanks for this. Didn't think it would because I understand there is slight different versions of ALC269, anyways thought I would give it a go. I did have everything working within 10.8 apart from my microphone with a custom patched AppleHDA.kext, however this does not work inside of Mavericks. I tried taking the layout28.xml.zlib out with some others from the patched one and inserting into the updated AppleHDA.kext, but I only managed to get Speakers working.

 

I installed your kext just to try it out, and seems everything is working fine, I've tested, Speakers, Microphone, Headphones. I will try the others later on, but it seems its working fine for me. 

 

I have Intel HD3000 so I need to patch AppleIntelSNBGraphicsFB.kext but I took the file from my patched one and inserted into the updated Mavericks one. I am yet to test it though. Would be good if you could patch that too and create a package with along with this AppleHDA.

 

Thanks a lot for this. Will look forward to upcoming Mavericks updates with your patched kext.

 

EDIT: Just checked my current patched AppleIntelSNBGraphicsFB.kext (moved the patched files into Mavericks kext) and I get display but no sound. HDMI audio does not show up in System Preferences > Sound. Here's the thread http://www.insanelymac.com/forum/topic/292616-only-hdmi-audio-on-one-kext-and-only-hdmi-video-on-other-kext/

Link to comment
Share on other sites
darkera13

i have an error on this line when I compile the dsdt "Return (GPRW (0x0D, 0x04))"

object GPRW doesn't exist

Try add Method (_DSM, 4, NotSerialized) only.

Link to comment
Share on other sites
X-TRiAL

@iaihc: Old version Mic In not work. Try to download new version.

Hi, with the old version my Mic work perfectly, but with new version it does not work, can you share the patching info with me for future updates? 

 

Also I got my HDMI audio working, it seemed that the AppleHDA you uploaded was patched correctly. I just removed the file inside of my already patched 10.8.2 AppleIntelSNBGraphicsFB.kext and pasted it inside of the new vanilla 10.9 kext. 

Here it is if anyone wanted it: http://www.insanelymac.com/forum/topic/292616-only-hdmi-audio-on-one-kext-and-only-hdmi-video-on-other-kext/?p=1954651

Link to comment
Share on other sites
darkera13

Hi, with the old version my Mic work perfectly, but with new version it does not work, can you share the patching info with me for future updates? 

 

Also I got my HDMI audio working, it seemed that the AppleHDA you uploaded was patched correctly. I just removed the file inside of my already patched 10.8.2 AppleIntelSNBGraphicsFB.kext and pasted it inside of the new vanilla 10.9 kext. 

Here it is if anyone wanted it: http://www.insanelymac.com/forum/topic/292616-only-hdmi-audio-on-one-kext-and-only-hdmi-video-on-other-kext/?p=1954651

You can follow this guide to patch. Old version i get from here, the new version i repatch to matched with my card. Each codec has many revisions, so nodes can vary.

http://forum.osxlatitude.com/index.php?/topic/1946-complete-applehda-patching-guide/

 

Script to patch AppleHDA:

http://www.insanelymac.com/forum/topic/284004-script-to-patch-applehda-binary-for-osx107108109/?p=1953762

Link to comment
Share on other sites
Mr.KiLLeR

Hi, I have 10.8.5 , will this kext work for me as i am really trying to make my audio work for 4 days now :( but i am not getting it to have sound or mic at all :(

Link to comment
Share on other sites
Zprood

GOOD JOB, i have the same audio card with you, i manage it work by using 2.1.7, but can't make it works under 2.3.7 (ML 10.8.3). 

Try the way you have done, it works like a charm both output and input. 

THX mate.

Link to comment
Share on other sites
vanmoo

Hi, i want to know, is this guide compatible with my Audio Device, Here is the dump from Ubuntu,

ubuntu@ubuntu:~$ sudo cat /proc/asound/card0/codec#0
Codec: Realtek ALC271X
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0269
Subsystem Id: 0x10250603
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC271X Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=8, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=8, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Switch", index=0, device=0
  Control: name="Capture Volume", index=0, device=0
  Device: name="ALC271X Analog", type="Audio", device=0
  Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x13 0x13]
  Converter: stream=4, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Internal Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Internal Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 5
     0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00] [0x80]
  Connection: 2
     0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 2
     0x0c 0x0d*
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80]
  Pincap 0x00000010: OUT
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Connection: 1
     0x0f
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Jack", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00001734: IN OUT Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x01a19820: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Connection: 1
     0x0d
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
  Control: name="Internal Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00001724: IN Detect
    Vref caps: HIZ 50 GRD 80
  Pin Default 0x99a3092f: [Fixed] Mic at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x2, Sequence = 0xf
    Misc = NO_PRESENCE
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000003c: IN OUT HP Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 2
     0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00000034: IN OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 2
     0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x40179a2d: [N/A] Speaker at Ext N/A
    Conn = Analog, Color = Pink
    DefAssociation = 0x2, Sequence = 0xd
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=25
Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Headphone Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000001c: OUT HP Detect
  Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Connection: 2
     0x0c* 0x0d
Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
  Amp-In caps: N/A
  Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Connection: 7
     0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x0b
ubuntu@ubuntu:~$
Link to comment
Share on other sites
hooda

i dont understand to place HDEF patch, where is it should to place for..?! try HPET patch didnt work for me.. :(

Link to comment
Share on other sites
×
×
  • Create New...